Southernlandy
Active Member
I think it's a bit rotten 
Southernlandy
Active Member
Once again, not my welding, but two new genuine LR outriggers
Haven't got any pics of the other side :doh:
Haven't got any pics of the other side :doh:
Dan_Trials
Well-Known Member
Fair enough, better to do that than substandard welds covered up with underseal and stuff
Doesn't mean you can't one day get yourself a nice welder and do your own repairs though, having a Landy it's kinda useful :lol: What model of welder do you have just now?Looking good with the new bits going on!
Southernlandy
Active Member
Moving the car undercover for the winter
Didn't plan on taking the engine out at first so I replaced the box mounts. I don't think these would have been working properly :lol:
Planned on leaving the engine in and sorting out that as another project later on, but took took the transfer box off only to find the mainshaft splines had nearly worn away completely.
Cleaning the mud off the transfer box
Didn't plan on taking the engine out at first so I replaced the box mounts. I don't think these would have been working properly :lol:
Planned on leaving the engine in and sorting out that as another project later on, but took took the transfer box off only to find the mainshaft splines had nearly worn away completely.
Cleaning the mud off the transfer box
Southernlandy
Active Member
Cleaning and painting heater
Southernlandy
Active Member
I decided to patch the chassis and get a new rear crossmember with the plan to save up and get a galvanised chassis in a few years time when this one has rusted too much. Hopefully, by rebuilding it now, the chassis change should be easier when it needs doing.
aaronmorris
Head's a shed
Will definitely make it easier, Should know the vehicle inside out when you're done
Oh and good work so far
discomark10
Well-Known Member
brilliant work
Southernlandy
Active Member
Engine out time
Front axle rebuild and front chassis pictures will be uploaded over the next few days
Front axle rebuild and front chassis pictures will be uploaded over the next few days
RAMBIRKETT
Active Member
Keep up the good work!
Southernlandy
Active Member
Axle off
Dan_Trials
Well-Known Member
You are fairly cracking on with it!
Southernlandy
Active Member
I'm only 16
All of this work has been done between the summer and now. I haven't had any time recently due to revising for exams so I will continue to update with pictures until I reach the current stage.
Jason2
Well-Known Member
Turboman
Mab An Gov
That really is impressive for a sixteen year old.I'm only 16
All of this work has been done between the summer and now. I haven't had any time recently due to revising for exams so I will continue to update with pictures until I reach the current stage.
I don't think I would have tackled that at sixteen, altho I did like taking motorbikes apart and rebuilding them!That wil be a lovely motor when its done anorl, even got a V8 instead of the dreaded 19j.
Southernlandy
Active Member
That really is impressive for a sixteen year old.
That wil be a lovely motor when its done anorl, even got a V8 instead of the dreaded 19j.
Thanks, Unfortunately, not a V8, its a 200tdi. I would've loved a V8 but the fuel and insurance costs would have been too much
Turboman
Mab An Gov
So it is, should have looked more of the picsThanks, Unfortunately, not a V8, its a 200tdi. I would've loved a V8 but the fuel and insurance costs would have been too much
. 200Tdi is a good engine as well, and as you say, much less juicy. I would have liked a V8 90 myself, but there just weren't any available down here when I needed a vehicle.
