Latest activity

Hi, Now that I have a nice under-engine protection tray, I cant get to the bottom hose from underneath to drain it. I can see it from the top and there is loads of space around it and I can loosen the clip, but my arms aren't long enough to grab...

There is already more hole than wallet! 10 spline is ok, a front locker is not realy necessary anyway. And for once, I agree with that sentiment! 😉

Ive had all sorts of issues from sensors being out of alignment. Bags deflating, ride height issues where the front was higher than the rear by a good 40mm+. Random fault messages....... For me, had to drop the car to the bump stops and bend the...

If you have black smoke, fuel flow is unlikely to be the problem. You don't have enough air flow for the amount of fuel.

Although, if you are throwing parts at the problem, rather than finding the error code, if you bung a cheap pump on and the problem persists as-is, you haven't wasted much cash and can put the original back on. I to, feel sure that if the EML...

Started fitting a new air con fan motor on my son's Td5. Bit of a faff as he has front spot lamps and all the fan housing screws snapped. Just soldered the wires today and will refit the spot lights once I have painted the mounting bar. Oh...

My bad... Same problem so, not for 10 spline... Quite limited choice for 10 spline axles.

Bumping up an older thread rather than starting a new one and messing with future searches... Is the VDO PM9261 and TYC630790 still the only non oem fans that fit and work? Amazon.com has the TYC avail and two of them is ~150 USD shipped, but...

Thank you, one less worry.

Many thanks for the advice - i shall certainly take it :vb-tup: Recent service has picked up some slight service rust on the under pans so have got myself some lanogaurd and the job of some brushing/cleaning and applying. Allowing myself a day...

totally agree with your conclusion, but if you have no idea where the cause of the problem is and rely on that the persons in the garage know what they do you end up in this "trial and error" and "process of eliminination" :-/ Meanwhile a young...

Hello. The ramps are 1200mm high. I have made the transmission jack adapter to fit the gearbox.i have searched online but a lot of the information is very vauge. Cheers