Latest activity

Hi folks, Is it possible to add auto wipers and lights to a freely 2 that doesnt have then as stock? I have just bought a 2013 fr2 GS which to my surprise didnt come with auto lights or wipers, after coming from my past 4 vehicles having this...

Star, thank you!

Aye right. 🤣 🤣

Oh, I dunno ------ :rolleyes:

I NEVER drink n drive.

Perfect. Thank you!

Looks well!

I do not have a direct comparison of the same engine 90 vs 110. My 90 is td5 and 110 a tdi. So they are very different setups. I will say from using the 110 regularly for hauling things about I personally do not think there is any driving feel or...

He must have been too drunk to be driving off to get chinee! EDIT, Indians!

Rapidly running out of suggestions on here!

Not today, but over the weekend really. 635mi round trip to Ard Rock MTB festival - didn’t set a foot out of place the entire drive. Set off Thursday after collecting a mate, and came back today. Even got complimented by one of the stewards when...

We had a positive earth 2a which we changed to negative earth. The original sender unit carried on working normally.

Agreed, love the LR , just see alot of negatives re repairs and costs but think I really know the answer haha. Just like to hear it from others too . Thanks

He's a bit old to be playing with dolls. :oops:

Your asking on a LR forum whether you should keep the LR or a Passat? VW are a good make, but I’d take the Landie any day - much more fun.

Do you have an engine crane? If so, in through the passenger side door to take the weight of the gaerbox. But you may actually find it easier to take the engine out.

Yes there is some play before the clutch engages

I am so so pleased and happy for you. They are worse than kids. They like to put us through the ringer. Give her a cuddle from me :banana: :banana:

Thanks for the response Yess, it must be like 3/8 thick, that whats concerning me

Id rather drive a freelander than watch kissyball....err wait a min I take that back. 🤣🤣

Thanks! So can pt hurt to hook it up and try?

Really!?Im pretty gullible…but wouldn’t surprise me.

No. It was just one wire.

I think the wrong master cylinder is causing the problem.not allowing full contact of the clutch. If a slight bit of pressure is still applied it could be causing the juuddet. There must be slack in a LR pedal for correct engagement. Has your...

The switch panel that sits beneath the armrest and contains the window, sunroof, etc switches has come loose from the hard front panel. So pressing the window switches just pushes the whole switch further in. How do I access it from behind to...

Hello all. I am replacing the clutch on a TD5 discovery. Whats the best way to do this? I have a set of high ramps and a gearbox jack. Thanks

Can hear somefink struggling to get into a nut. Fink its kev.