Latest activity

Release bearing was changed and we checked engine and gearbox mounts they were fine

No we did not changed that but wouldn't that bearing being bad would cause lot more problems than just juddering ?

Filled the tank the other day, no difference. Same symptoms. I don't know. May drop the tank. Not much of a job. 4 bolts and undoing the two filler/breather hoses. Could be gunked up? I am leaning towards my fuel pump. I am getting mixed...

And today I had the first proper drive with the new brain installed and so far all good. I still need to tidy up some 12V wiring like the heater controller, Chademo control and a few other things also tweak a few settings but it's driving as well...

Is the felt glass channel in one or two section? Is the correct part number MUC4071 for a 4mm window? Thanks in advance.

PM’ed you

Looks like you are missing the large washers...

Too short for what?

Both, its free to keep them

Fairly recent ownership of 2013 Freelander (few issues to resolve). Love driving it but I've also got 2012 1.6 TDI Passat from new. Injector 4 replaced recently but possibly another on the way out as still not running right. One has to go in...

anyway the timing sensor is the one i need so if you have a spare one or know of any i would be gratfull if you would sell it to me but dont deprive yourself as they are hard to come by

I bloody love Canal Boat Diaries

Was a toss up between Wimmins kiss ball and Canal Boat Diaries :vb-wonky2:

They has done up the tennis courts over the park near me. The middle SFH (see earlier posts) has an interest in tennis and has even been bought his own bat so we went over yesdi for a knock about. OMAFG, the best rally achieved was three, with...

Excellent, thank you.

Thank you very much!!

Excellent, thank you.

Here’s the part numbers(off eBay) As you can see they are differnt so you will have the wrong stick.(looking at the pictures) Hope this helps

Good news, the cat is back! She limps, but is otherwise fine. She sits in drive way bow, guarding the entrance. If I counted correctly, it is life 3 that is gone. Maybe even number four. She sure lives dangerously!😅🥰 In other news, I found out...

Alright thank you :D So this is normal for a LHD? I live in Germany :D

Should have been too drunk to be able to drive. And WTF happened to the barbies??

have faith for your cat Ours went missing some years back and after 8 days we had given up all hope until he came walking up the garden path looking a bit thinner and a bit bedraggled. Turns out the house 4 doors away was being renovated after...

Gear stick in the correct place,your steering wheel is in the wrong place But it is the correct gear stick for a 2A Off for a part search

Great this is fantastic and really useful for future reference too

Hello everybody :) Two weeks ago I bought a Land Rover Series 2a. I've owned a few classic cars, but never a Land Rover. I have owned a Triumph Spitfire 1500 and a GT6 before. I've already done a lot of electrical repairs, but there's still a...

When you do the fronts you may need new shocks & turret rings on the shopping list. Same process as the rear(remove roll bar if there’s 1) stands under chassis, remove panard rod can make life easier.

Hi everyone I have a quick question. The thread for the rear control arm is to short. It‘s an older Range Rover with a 5/8“ thread. Did anyone had the same problem?

I bought this stereo for my landy I know it's not the right one as my landy has Harmon kardon speakers, is there any way to get it out of phone mode and main speakers to work (I am not worried about the tweeters too much) Thanks in advance