Latest activity

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Live updates
  • P
    Hi, Had issues with water in the engine bay fuse box after leaving the bonnet up in a monsoon! Struggled with the horn, abs motor and air pump operating randomly due to water lying in the fuse box. I've stripped it out and one of the harness...
    • 20250718_093946.jpg
  • A
    Anaconda replied to the thread Pre-Purchase Advice! Leaks..
    Why don't you post up the advert so we can help better? Intermediate shaft o-ring can be changed with the transfer box still in the vehicle, almost, just about. I have done it twice, although you do have to release the box and slide it back a bit.
  • B
    Sorry to butt in but how do you lock suspension at motorway height as on first rangey and handbook quite knackered. On the polybush bit I have found parts that rotate more than a few degrees seem to wear polybushes rapidly even when using correct...
  • DanClarke
    DanClarke replied to the thread I would just like to say.
    Morning All. :D I had a lie-in. :) Have a great day! :D
  • Phill
    Phill replied to the thread Pre-Purchase Advice! Leaks..
    I'd probably buy it on that observation. The chassis protection system can be repaired easily enough.
  • LR-hobbs
    LR-hobbs replied to the thread P38A P38 eas issues.
    no sorry my mistake, it bubbles only with the compressor running . Doesn't bubble with it off.
  • Knappster
    Knappster replied to the thread Tea on the Tailgate Meets.
    I attended my local meet last night, only a few miles from home. Some other owners had travelled an hour or more to attend. It was a nice relaxed meet up with a variety of land rovers.
  • M
    mild08 replied to the thread Front Axle Oil Leaks.
    Did not think of that. I will take a look.
  • badfluffy
    been there done that spent 3 days looking for it, found it 4 years later still stuck under a hose along with a 10mm socket i lost the year before
  • Wimblowdriver
    Wimblowdriver replied to the thread I would just like to say.
    I want to check me tyre pressures and grease the UJ's today. And check fluids. But clouds are gathering and a few drops of rain have landed already. Might get it done this afternoon.
  • Crankington
    I know that he didn't skimp on services and general maintenance, so let's see, roll on Monday, interested to see what I discover
  • R
    RTH94 replied to the thread Pre-Purchase Advice! Leaks..
    Sounds good! Thanks for the replies. This was actually the 2 signs of oil leak (other than screen wash!), this transfer box and also the rear diff. The rear diff just looks like the bung hasn't been tightened properly as theres signs of a small...
  • Wimblowdriver
    Wimblowdriver replied to the thread I would just like to say.
    That's what is known as a dichotomy. (lookit up) :p
  • pwood999
    pwood999 replied to the thread P38A P38 eas issues.
    If compressor line is bubbling with system off, it's most likely NRV-1 allowing tank air to escape via the drier. The more the tank empties overnight, then the pump has to work harder in the moring to fill it & raise the car.
  • GrumpyGel
    GrumpyGel replied to the thread ignore thread please.
    OK then, I suppose we'll just have to Carry On Ignoring
    • 1752825251996.png
  • Hippo
    Hippo replied to the thread I would just like to say.
    Window man were a bit pushy. Wunt wuk wiv me. We has agreed int principle eye will have em fitted wivvin 6 months but not when. They can naff oft till am satisfied and ready. Gorra free door assa gimmick to fit sooner. But yer never know if that...
  • LR-hobbs
    LR-hobbs replied to the thread P38A P38 eas issues.
    When I took the diaphragm end off the disk style seal had torn and nearly all the o rings were flat. The only issue I have now is when I leave the car and pull the relay out it airs down over the course of a few hours/overnight , so I do...
  • P
    Car refused to crank over the other morning until I did a percussive realignment on the starter motor..... New starter fitted, got to admit I'm impressed at how much a PITA of a job it was. But the new starter is much smaller and the car now...
  • lightning
    lightning replied to the thread Drive Before I Decide?.
    Also try Auto Trader, there's a lot on there and prices seem a bit better than Ebay.
  • Freddie17
    Freddie17 replied to the thread ignore thread please.
    I don’t think we’ve actually found out yet… 😵‍💫
  • lightning
    You can buy "plug and play" where you just plug the replacement ECU in. l think it's just the immobiliser that's disabled. There's a company near me who does them. Around £700 when l bought one.
  • GrumpyGel
    GrumpyGel replied to the thread ignore thread please.
    Sorry m8. We're lightweights. Any ways up, what were we ignoring again?
  • I
    This code can also be lost or change if you go and change the language of the cluster with a universal tester, ask me how i know :D Anyway got the ac working, ended being broken wire going to the compressor. I thought the clutch was engaging...
  • NorfolkBird
    NorfolkBird replied to the thread ignore thread please.
    • Screenshot_20250718_080614_Samsung Internet.jpg
Back
Top