Latest activity

When you say no one here knows, you are assuming that every single person who looks at this forum site has already looked at this particular question and given their answer. That is obviously not the case. All you are really saying is that the...

Yes, Kiddo!!!🤣🤣🤣

Well done for supplying this info! I too am hoping this will lead him to put us all out of our misery!! In the end, if they don't work for him I dessay he'd be able to flog them on for much what he paid for them. Also would give him the chance...

This was offensive? 🤔

Did mine last year they stop at two places building up to a compression stroke and get quite burred over

Shame it's an hour tween Thiefrow and Hardpenden, else you go over and take the pics when/if he does the biz!!! 🤣

Casings appear to be the same fairly certain the rear subframes are too so the mounting points should make sense to be the same and from what I can find, the driveshafts all appear to have the same part numbers so I'd say it's worth the gamble to...

+1 on could be a long wait.

The short answer is, no one on here knows. It does happen, we are not the fount of all knowledge. So when you find out and tell us you will have added to the knowledge bank of the whole LZ community and Wossis name will prolly draw a cartoon of...

Yes I know but I saw it and since people might not have read anything before the last comments it was worth putting that comment there for others. Not for you. So basically I was not posting to you, either.

Or wait to see if someone with knowledge answers my simple question.

and I learnt something. Thanks Stanley.

Get a lickle kid to help you, then he/she will be able to see if they go "round and round, round and round!"

Given you had the wrong pins then the pads may well be wrong as well.

and I wasn't posting to you, it was to @pwood999 🤣 🤣 🤣

Yes we like comment from each other even it's not all correct, but it does lead us to try different things. Topics frequently go off-topic but we simply accept it. As you noticed this forum contains much banter, scarcasm & information (some...

And as I said, Ashcrofts do not do the L322.

I get similar lottery with bendix teeth and or ring gear 🙈

Hopefully Freddie will report back to us so we know what is going on, looks like the injector needs to be changed out, make sure EGR, manifold & MAP sensor is clean, drop some injector cleaner into the tank, it's always good to book your MOT time...

Wait - what? Where?!? I can multi-task and ignore 2 at the same time if needed...

See post #104 🤣 🤣 🤣 🤣

Easy to ignore this thread, now there is a far more entertaining thread to ignore in the RR section. 😂

Yes it has because everyone here has continued to repeat the same incorrect information over and over again and throw out more and more insults and never stop. I spent almost a year reading this forum and this is standard behavior for most of...

Similar to mine kept the cross shafts and original cable with a home made turned ally thing , keeping the hand throttle too

Just fitted new calipers and pads to rear. convinced I have the right parts. Caliper dimensions all the same. Brake pad set arrived with new pins and springs but pins too short ! Pads fit with old pins. However there is allot of clearance between...

Even when you're ill? Well done - great level of commitment.

Thanks for the same answer that I have already explained multiple times I have no interest in doing if the diffs will not fit. This is why I am laughing at you guys. I repeatedly explain my reasons for not following your completely ridiculous...

Hasn't been worth ours - jog on.

I was literally insulted with the very first sentence that the very first person said. The second comment was a massively patronizing insulting comment. Go back and look for yourself. I have not had a terrible experience, I have said many...

God yes, I'm totally ignoring the whole thing.