Latest activity

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Live updates
  • Mark Piercy
    Of all these points you've made are really valid... You can't argue about something you haven't done yourself, let alone shout at posts that may know more than you 🤷 I wouldn't ignore this one as I'd love to elbow the funk out of every comment...
  • kevstar
    kevstar replied to the thread My crazy diff ratio change idea.
    Fit bigger wheels & tyres and a lpg kit, instant rpm reduced/cheaper fuel. Change axle diffs what about the centre diff ratio as they dont match the transfer box, so what happens when you need to go faster eg up hill when you need higher...
  • Mark Piercy
  • Mark Piercy
    Your correct by all means, maybe nobody has changed diffs yet. Maybe they've not needed too but this is maybe your time to shine. Back down a little before shït gets stupid and we don't need that.... You could be the one who teaches others. So...
  • RangeRoller dt
    Weight makes a big difference to economy. You’d save fuel by not being so full of ****
  • kevstar
    If you'd stop being a Freelanderer your misses would stop knocking you about with it & the pan will last longer. 🤣
  • Mark Piercy
    I dont think anything belongs to me, in fact we are just a meir passing in this time scape. If you haven't already got your answer the maybe it hasn't yet been done. Go and do it and then you can preach but until you've done it,... I'm not going...
  • R
    The wait will be over when someone who knows if the 2.76 diff will fit into my 2002 Range Rover L322 or not answers the question. Or if someone knows of some other technical mechanical reason why that diff cannot go in my car. As opposed to...
  • R
    Why would I go and buy two differentials that might not fit when I can just come here and ask a question that somebody might know the answer to? This has nothing to do with my gearbox, it has to do with my engine. I don't understand why you think...
  • steve2286w
    Best repost that in the freelander forum oh and Welcome
  • Mark Piercy
    Then get on with it and stop asking questions. Most of us have experience to back it up. My 38' is programmed and puts out 170bhp since 2005 and keeps pushing. I know I can argue with the best about gearbox life and longevity. Go on, do you your...
  • brianp38dse
    • 1751923418009.png
  • S
    Squonker replied to the thread Test drive.
    But you can put on another layer and drive around with a big **** eatin' grin all day long :)
  • RangeRoller dt
    This means something. Once you realise the wait is over.
  • R
    I don't know what you are talking about. The L322 is one of the most modified Range Rovers available. People put manual gear boxes in them, coil over spring suspensions, raise them up, change the wheels, reprogram the engine computer, make the...
  • kernowsvenski
    A couple of interesting examples on ebay at the moment... No2 has some mods on I'd like...
  • steve2286w
    That is good lasted longer than my frying pan 😀 and that don’t go very far at all
  • N
    nathanglasgow replied to the thread Fairey Overdrive Linkages.
    Sure you've bought a Fairly overdrive and not a centre pto. The centre pto has the operating lever coming out of the seat box. Never seen a Fairy overdrive linkage anywhere else other than exiting from the trans tunnel. Post a pic of the linkage...
  • kevstar
    kevstar replied to the thread I would just like to say.
    For some reason this came into my head..... My mate sold a boat & trailer to a lad who came via the ferry as a foot passenger, he told my mate to launch the boat with the trailer ratchet strapped onto it & off he went 🤣 🤣
  • kernowsvenski
    kernowsvenski replied to the thread ignore thread please.
    I've been so busy I've not had time to proactively think about ignoring which has been pretty helpful in said ignoring obviously. As I'm now less busy your posts this evening are a helpful reminder and I'll now get back to consciously ignoring...
  • LR-hobbs
    LR-hobbs replied to the thread P38A Tuning the 4.0 thor.
    Don't try and ruin my dreams 😂 I can't see any warning lights that's the way I wan It.
  • Mark Piercy
    Knock yourself out, like I said, a lot of bods run these machines within their limits because they do what they do and people are happy. If they don't do what they want then they buy something that does. Long gone are the days we're we can mod...
  • Wimblowdriver
    Wimblowdriver replied to the thread I would just like to say.
    I had one of those but it sank first time out :oops:
  • kevstar
    kevstar replied to the thread I would just like to say.
    Im clearing out my shed well more like a barn than a shed. Sold my running machine & rowing machine. Got a big multigym to go plus a load of wood working tools all 240v bobbin sander bench grinders pillar drills, scroll saw plus a couple of older...
  • R
    Leave where? This forum? The place where I came to get answers about the ability to change over the differentials, which has not yet been answered? Are you the only person that can answer this question? Are they not other people that might see...
  • kevstar
    kevstar replied to the thread I would just like to say.
    We got sunshine :p:p so there 🤣🤣
  • Mark Piercy
    Leave then🤷
  • FEI
    +1 on the loctite The screw does tend to work itself abit looser during the first few heat cycles.
  • R
    I meant 1,500. That is not high. It is not low. It is what it is. But 1,100 is lower. That is a fact. I have a 23 year-old engine in a car that has probably had a little maintenance in the 150k miles that it has done. I will not spend the time...
  • Grrrrrr
    Grrrrrr replied to the thread P38A Tuning the 4.0 thor.
    Try the dimmer switch or failing that, tap the cluster near the bottom.
Back
Top