Latest activity

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Live updates
  • Henry_b
    137k 1 set of HG's and lots and lots and lots of petrol...... ;) :)
  • R
    Any tips on how to test it?
  • RangeRoller dt
    Any luck with the windscreen?
  • UnitLandy
    Oh! Might I enquire what that is? 😃
  • sierrafery
    You have to press the SET+ only not buttons ...did you read the WSM about how to operate the CC?
  • Flossie
    Flossie replied to the thread Are lift pumps getting worse?.
    Correct. 4psi is the max pressure the pump can make against a dead head. It ticks away for a few seconds just before starting the engine then stops. I never hear it when the engines running. Makes bleeding the fuel system a doddle too. I fit 1/8"...
  • mad85
    when i press the cruise control button the little light turns on , i accelerate normally to desired speed and then try to press the buttons but nothing happens. horns work, yes
  • Phill
    Phill replied to the thread Are lift pumps getting worse?.
    The quality of everything is getting worse. That's not a cynical opinion, it's a fact documented by consumer watchdogs, vloggers, bloggers, and the media. So it wouldn't surprise me if the quality of modern diesel pumps is now crap. So no diesel...
  • sierrafery
    Can you accelerate from the remote?... also are your horns working?
  • doriz
    doriz replied to the thread Oil bath filter color.
    I had a tin of yellow left from painting a tractor PTO bar. So mine is yellow.
  • R
    Problem started last week. Ignition comes on, but first turn of key, nothing, second or third it would fire up. Yesterday, Ignition comes on but won't crank. Cleaned every battery terminal, starter terminal and engine earth. Took starter out...
  • mad85
    100% valid point however i also travel to continental europe or africa and there cruise control is very convenient. This a photo from my latest adventure in the sahara :D
    • 1750264713236.png
  • mad85
    Everything checks out. On the next page there is also the resume and set accelerate inputs and those also seem to be registering
  • D
    Thanks both, I had the wheel off yesterday and gave the drive shaft a pull and it was defo out, so gave it a good shove back in, heard the click and all was solid. Wheel back on, test drive and it's as though it never happened. Thanks for the...
  • R
    Thankfully mine's been behaving for the last few weeks, busy going to and from night work, a couple of social events, mostly motorway work. I tend to get though about £100-worth of diesel a week, car says 27.8mpg. But that depends on whether me...
  • andyfreelandy
    15,000 mile update. Front 5.5mm Rear 5.9mm Dropped tyre pressure to 30 psi all round. They are still wearing 0.5mm more in centre.
  • landowner
    Power steering system flushed with 2 litres of new fluid and new reservoir fitted I have a noisy pump, never noticed it before, let it develop for now Cleaned the seats as it's a lovely day and hoovered the life out of the interior, not a dog...
  • andyfreelandy
    V6 has a different VCU to TD4 and 1.8 petrol. No damper fitted. 3 door and 5 door are same length wheelbase. If yours is missing do a search and check IRD and diff are not damaged before fitting then do the one wheel Up test afterwards to...
  • Rhode rover
    Rhode rover replied to the thread Oil bath filter color.
    I think I was the one to confuse everyone. I think the blue filter container looks great blue, mine is grayish / silver on my 73 series 3 I believe and wondered if blue was an original color. As for a refurb on my oil bath air filter I'll most...
  • I L
    I L updated their status.
    On the hills with the Freelander
  • I L
    Hello, i'm considering fitting a new propshaft to my 2004 fl1 with 5doors. I found one (used) complete propshaft with vcu and bearings, but it is advertised as one coming from a soft-top fl1. In the pictures it looks similar to mine. Are there...
  • F
    Fergie b replied to the thread P38A ABS Traction control..
    Thanks to all. Finally got the problems solved. Front sensor was an aftermarket new one that didn’t work and ended up putting a Wabco second hand one in and worked. The other problem with the inlet valve open circuit was an internal failure of...
  • DanClarke
    DanClarke replied to the thread Getting Gwen the Mini to Run..
    And no offence taken, of course. Before the "tune" the soot problem with a BDL needle was pretty much non-existent, but it did not run very well in the part-throttle range it would pop and bang if you tried to accelerate too rapidly. After the...
  • SteveG4TRA
    SteveG4TRA replied to the thread ACE system pipe corrosion.
    Total cost for this repair was £286.50 inclusive of ARBs, new bushes, vertical links, Pulley, Drive belt and single reservoir.
  • WoodyO
    Gotcha, thanks. Ive got my electric fan on the outside of the radiator which limits my options somewhat.
  • mikerajjers
    That makes perfect sense now, thank you!
  • Flossie
    Flossie replied to the thread Are lift pumps getting worse?.
    I gave up with them years ago. I use a facet 4psi pump, hole in the block capped off.
  • DanClarke
    DanClarke replied to the thread I would just like to say.
    ... that the hospital called my wife to talk about the MIL. The GA on monday has brought on delirium in the old gal (it often happens when they have dementia in the first place). Her kidneys are shot from weeks and weeks of vancomycin, her o2...
Back
Top