Latest activity

https://www.smithandallan.com/product/smith-allan-momentum-fs-5w-30-engine-oil-4138 This one ok?

Ok it's not a Disco but you can see the turntables and plates on the ramp.

Brilliant thanks Milktdish. Really helpful. I’ll give it go.I've got the right part as well. Phew

unfortunately cruise control is still not working. so what is my next place to check?

How did you press the new ones in?

The ramp has a turntable on each front wheel which moves when the bolts are adjusted, same with the rear except the ramp base moves without a turntable. The bolt isn't really pushing against the weight of the vehicle. I know the explanation is a...

Oh mate. Commiserations on your terrible loss. We all feel for you at this sad time. 😢

No, rough, contitec, genuine. Will run a bit longer before I buy anti squeak spray.

Right ok peeps I went n bought a new phone yes I spent some cash please be kind....

Evening all! I’ve seen a few discussion about DIY headlining on the 90s but no huge detail (unless my search is just poor?). I would like to fit some headlining, and probably carry this down the back walls in the rear of the 90. I don’t want...

Hello. I recently replaced all the front suspension arms of the vehicle myself. Needing an front end alignment I contacted the local workshop as I assumed this would be a straight forward job. But surely they called me and said that I've...

So today I've finished off changing my trailing arm bushes, got one done yesterday and did the other today, so that's the pair done and cleaned up/painted. I only had to cut one bolt as well so that's a win, some kind previous owner put copper...

Nope it should look like this....

Undo that nut on the top, in the middle, the bottom and canister will drop out ... Heres what a new one looks like ... https://www.ebay.co.uk/itm/222520618352 Other sellers exist

Pressing the mileage reset gets rid of the airbag fault message until the next ignition cycle.

I bought some glow in the dark fluid stuff a while back which you add to your oil, and then spot potential leaks using a black-light UV torch. Helped me find a couple of leaks, but only after I’d jet washed the hell out of what was there already...

Had to use look the tinterweb to search for Wickes. There's one in Stirling cant see me ever going there to see what they got same as Jewsons, beatsons B&Q ect ect I had a blonde moment & couldnt process wix :rolleyes: Never seen yin of them...

Started taking the rad out of the scrapper then realised it was original and being an automatic had no fittings for the manual cooler. Reassembled, bled etc. and lost an hour. Went for the red one and took the rad out. Swapped both it and the...

Where did you get the chandelier in your conservatory 😉

Does it have a smooth back. If so that's your problem. Genuine are slightly rough finish Griff

The 2.0ltr🤔

This one…?

No, far more old-skool NA 1275 Metro. :)

@DanClarke does yer mini engine look like this one…?

Look on fleabay. Are yours the same size as the LR standard bracket?

Thanks 😊

7 litres is too much. They take just under 6 when drained, IIRC. I think 6.8 for a dry fill. You’ll need to remove some. It’s about 1 litre between min and max on the dipstick.

I just back off the locknuts push the rod towards MC then move nuts so it’s nipped without free play then back off the nut nearest MC 1.6mm by eye move rod back away from MC then nip far nut up , hopefully make sense looking at diagram. You...

At least if the problems do return after this MAF sensor has been in for a while, you know to get a replacement Bosch one.