Latest activity

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Live updates
  • Freddie17
    Looks tidy … and it looks like matched tyres, so fingers crossed it’s a loved one
  • Stanleysteamer
    Stanleysteamer replied to the thread I would just like to say.
    You make it sound like I went searching for something to deliberately make some weird point, I didn't I just searched for "most humane way to kill a rat" The UFAW is a respected bunch They combine with the RSPCA and the IAT did you actually...
  • andyfreelandy
    Apparently, but we'll see ! Picking up tomorrow.
    • Screenshot_20250404_112332_Facebook.jpg
  • Freddie17
    Freddie17 replied to the thread I would just like to say.
    What, a cardboard box? 😲
  • S
    scott3933 replied to the thread MYSTERIOUS OVERHEATING ISSUE.
    That is exactly what my temp gauge looked like with the earth issue! Very quickly up into the red, when in reality the engine wasn't even up to temp at that point as someone had removed the thermostat :rolleyes: I knew right from the start...
  • J
    Jones1234 replied to the thread Paint Removal.
    Not overly, a combination of used DOT fluid, paint stripper and celluose thinners has worked best so far.
  • Hippo
    Hippo replied to the thread I would just like to say.
    About time we hadda pic of a propper tractor on ere. And norra pretend one.
  • Def90man
    Def90man replied to the thread I would just like to say.
    This is what I club rats with. Very humane 👍
    • IMG_3240.jpeg
  • Hippo
    Hippo replied to the thread I would just like to say.
    Went chopping in sainsberrys yesdi. Got meself 3 packet mixes for me bulk batch of homemade meals. If anyone asks they taste orrible so they dun't get eatid by others. On said packet it says serves 4, 7.3 grams of fat each. Thats got me...
  • A
    Anaconda replied to the thread D2 Metallic Rattle in Neutral.
    Did you find an answer to your rattle?
  • A
    Anaconda replied to the thread Paint Removal.
    Did you find a successful method of removing the paint?
  • A
    Any progress?
  • A
    Anaconda replied to the thread Whiring noise on load.
    Any updates?
  • A
    Anaconda replied to the thread 2in Lift Kit.
    I would change them while you are there, especially the front. All looks very rusty, I would be checking them brake lines. Don't know for sure but if it has extended flexi pipes you might need to change them back to original 🤔
  • R
    RexCabot replied to the thread Disco 3 (LR3) Why ?.
    Battery is new and no error codes
  • brianp38dse
    rikthepik at callrover might be worth a call he may well be able to sort it
  • S
    Safetyspice replied to the thread 2in Lift Kit.
    Hi, The shocks "look" to be OK, so if the shocks, are OK, is it perfectly OK to leave them on and just change the springs?
    • LR Springs 1.jpg
    • LR Springs.jpg
  • O
    OGY replied to the thread Whining sound.
    :)
  • biketeacherdave
    biketeacherdave replied to the thread Whining sound.
    Tell her to get out and walk then.....
  • Hippo
    Hippo replied to the thread I would just like to say.
    Debbie has opened up one of her flowers. Tis her first. Spottid yesdi. Just looked. Second one is half opened. Gorrabowt 8 more possible flowers from buds. Lovely pink colour. Eye is wonering if eye can take a cutting to make another. Edgar's...
  • Hippo
    Hippo replied to the thread I would just like to say.
    Thats a bit steep. Assume yer open to offers?
  • landowner
    landowner replied to the thread I would just like to say.
    Mornin Sunshine again Bathroom fitter here early, floor dug up yesterday and re-laid, radiator going in as we speak. Volvo on ebay .99p fingers crossed, got full service history up till last summer. Didn't sleep well, chest full of dust from...
  • O
    OGY replied to the thread Whining sound.
    Thanks for your help, Freddie. I’ll do that.
  • Hippo
    Hippo replied to the thread I would just like to say.
    Where's @DevonGuy
  • Hippo
    Hippo replied to the thread I would just like to say.
    Sat int kitchen having me brekfust waiting to see if me squirrel appears. Gorra homemade mince pot out for later. Foring out on my window sill.
  • Freddie17
    Freddie17 replied to the thread Whining sound.
    I'd check the VCU and rear diff, plus associated bearings and mounts
  • Hippo
    Hippo replied to the thread I would just like to say.
    So yer found a web site that suggests clubbing them to death is the best meffud. When searching the web you have to step back and consider if the information being given is the best. They set themselves up to be an authority on animal welfare but...
  • DanClarke
    DanClarke replied to the thread I would just like to say.
    Morning All. :D Wifey up to her Mums again this morning. :) 2 scam calls in the past 5 minutes, arecord. :( Have a lovely day. :D
  • TITCH SANDERS
    Or failing this, what's anyone's thoughts on bypassing the oil cooler altogether.. even if it's only for a short period?? I know it's an auto, but I wouldn't be doing high/fast motorway mileage nor indeed towing heavy trailers?? Thoughts...
  • O
    OGY replied to the thread Whining sound.
    Hi Freddie. The sound does not go away when I disengage gears. There is no sound initially. It comes on after a while and usually above 30mph. The sound gets more whiny with increase in speed and is constant. I thought I noticed a difference...
Back
Top