Yellow Peril, the new addition

Sirus · Feb 15, 2010

Took Bulkhead of today and its now in storage (the shed). Engine should be out tomorrow hopefully if the weather is nice. Then its strip the rest off ready for a newer chassis arrival on Saturday.Look out for loadsa bits on Ebay in the next few weeks.

90truckcab · Feb 15, 2010

dunt ferget me list

yer usin the chassis off the newun then?

Sirus · Feb 15, 2010

90truckcab said:
dunt ferget me list

yer usin the chassis off the newun then?

I think so...whoever had this un before had a strange way of welding stuff up. I'm stripping off all the out riggers and rear crossmember as they are newish and look in very good condition.

90truckcab · Feb 15, 2010

bit like mine then , my xmember and out rigers are good the chassis ladder is buggered !

thort this new 'un wer a ser3 ?

Sirus · Feb 15, 2010

90truckcab said:
bit like mine then , my xmember and out rigers are good the chassis ladder is buggered !

thort this new 'un wer a ser3 ?

It is.... you int gonna tell the rivet counters are you

90truckcab · Feb 15, 2010

Sirus said:
It is.... you int gonna tell the rivet counters are you

nah ok,

yer secrets safe with me,

in that case , i can get a brand new ser3 steel chassis not galvo fer a lot cheaper than a ser2

only difference is the gear box x member int it ? worth thinkin bout, i can gerrit dipped fer £100

ah, why bother , might as well get me self a proper ser2a galvo

Sirus · Feb 15, 2010

90truckcab said:
nah ok,

yer secrets safe with me,

in that case , i can get a brand new ser3 steel chassis not galvo fer a lot cheaper than a ser2

only difference is the gear box x member int it ? worth thinkin bout, i can gerrit dipped fer £100

ah, why bother , might as well get me self a proper ser2a galvo

Nah get a Series 3 un and get it dipped....then change your mind, give it to me and get a series 2 un

90truckcab · Feb 15, 2010

Sirus said:
Nah get a Series 3 un and get it dipped....then change your mind, give it to me and get a series 2 un

dunt go there, that engines been three colours and now its ended up just polished metal , with clear laccer on it

im good at changin me mind,

Sirus · Feb 20, 2010

90truckcab said:
dunt go there, that engines been three colours and now its ended up just polished metal , with clear laccer on it

im good at changin me mind,

You got rid of the blue paint???

Sirus · Feb 20, 2010

Went to collect another Series today. Came already stripped to a rolling chassis which has been welded and painted with new brakes, new fuel tank, new props, new shocks and springs. It also came with a truck cab, Hard top and sides.

90truckcab · Feb 20, 2010

Sirus said:
You got rid of the blue paint???

nooooo, its just as yer saw it si, it was all red oxide when i first did it, thats all inc the block, but i did the block again, stripped to clean steel

Sirus · Feb 20, 2010

Need some sort of hammer and chisel to get the crap off my engine....it must have a 3 inch solid crust all over it.

90truckcab · Feb 20, 2010

paint rush and some diesel , then get the jet wash on it

Sean · Feb 20, 2010

Sirus said:
Need some sort of hammer and chisel to get the crap off my engine....it must have a 3 inch solid crust all over it.

that 3" crust is the engine block Si

Sirus · Feb 20, 2010

Sean said:
that 3" crust is the engine block Si

I bloody hope not. Ive shifted some of it and found some sort of paint

Sirus · Feb 20, 2010

90truckcab said:
paint rush and some diesel , then get the jet wash on it

Technical problem.....my jetwash has decided it doesnt like water anymore and throws it out of anyplace it can... anyone got a hot jetwash they want to sell???

Sean · Feb 20, 2010

Sirus said:
Technical problem.....my jetwash has decided it doesnt like water anymore and throws it out of anyplace it can... anyone got a hot jetwash they want to sell???

ave got this on me watch list

KARCHAR HDS 601C STEAM CLEANER on eBay (end time 21-Feb-10 13:48:45 GMT)

Sirus · Feb 20, 2010

Yeh thats on mine too.... All the ones round ere are either fooked or over a grand....

Sean · Feb 20, 2010

Sirus said:
Yeh thats on mine too.... All the ones round ere are either fooked or over a grand....

i've got something similar to this and it's been fine for everything landy

PETROL PRESSURE WASHER MOTOCROSS MOTO X JET WASH on eBay (end time 22-Feb-10 13:25:09 GMT)

have been looking at steam cleaners only because doris says she wants one, thou i suspect she wants it for cleaning the oven and other "domestic" activities

Sirus · Feb 20, 2010

I thought while I was replacing my jetwash it would be worthwhile getting the steamer to shift the stubborn crap.

Yellow Peril, the new addition

Your all Banned except me

Well-Known Member

Your all Banned except me

Well-Known Member

Your all Banned except me

Well-Known Member

Your all Banned except me

Well-Known Member

Your all Banned except me

Your all Banned except me

Well-Known Member

Your all Banned except me

Well-Known Member

Banned

Your all Banned except me

Your all Banned except me

Banned

Your all Banned except me

Banned

Your all Banned except me

Similar threads