x-eng handbrake

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
yer... save you the hassle of removing the drum and cleaning the brake and re lubing the pistons on the actuators each time is seizes. i will be getting one in due course

G
 
had one sat in my shed for a while for when i change my tranny box, which is away at the reconditioners at the moment, soon as its fitted ill let you know what i think, looks like a quality bit of kit!!!
cheers
tom
 
they look to be "fit and forget" parts. Ive been informed that the units produced by scrap iron are made of toffee. how true i dont know, but speak to Simon at X eng and get the original from him.

G
 
I 2nd what griff ses Scrapiron are well known for nicking everyone elses ideas and designs and then making a **** job of copying them using crap inferior parts and charging the fooking earth for them. Companies like these should be avoided like the plague!!
 
I avn't had any trouble with the standard set up since I replaced the rubber seal thing, greased the bits wot needed greasing, an cleaned the ****e out of the bits that needed the ****e cleaning out of em.
 
Treworgey 90 said:
are they good? - yes.
are they worth £200 - no.
Click to expand...

Si is quite active on that lr4x4 forum and offers a discount to members if you buy items off his site via the special link

tis a lorra money to replace something that works very well if it's adjusted correctly
 
Ive got an X-Eng. Its the fookin bollox!!

I had no end of trouble with my drum brake. Yeah they work when they aint full of ****. But I cant be fooked to strip it down and service the fooker everytime I go mud pluggin!

With the x-eng you just jet it off and its good as new! Even when it is covered in **** it still works far better than my drum brake ever did!

As for £200... Im pretty sure I only paid around £150 for mine!!
 
as stated they aint quite 200 nicker.

my time is worth that money so id rather not be stripping down the piece of ****e original set-up. as soon as mine starts playing up its gone.

G
 
theys very easy to fit , and work just as they should .... replaced my original one with an xbrake cos mine kept stickin ... i had a bit of trouble with the cable rubbin but it was no big deal to sort ..... well worth it in my opinion....
 
You must log in or register to reply here.

Similar threads

R
2nd row 200tdi seat query
Replies
12
Views
699
dag019
dag019
Officerdibble
Handbrake adjustment
Replies
9
Views
761
miktdish
miktdish
G
MIG welding gas supplies
Replies
14
Views
1K
Anaconda
A
K
What money should I be asking?
2
Replies
27
Views
4K
Karls
K
Matt Poiner
Steering wheel nut
Replies
8
Views
323
kevstar
kevstar
Back
Top