sheepbotherer
New Member
- Posts
- 15
- Location
- devon
Blimey, I actually have everything except the hazard warning lights working on the series 3!
woohoo!
- Thread starter sheepbotherer
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
300bhp/ton
Well-Known Member
- Posts
- 5,009
- Location
- Near MK
Do Series III's have hazards?
sheepbotherer
New Member
- Posts
- 15
- Location
- devon
Later ones do as its an MOT requirement I believe.
GingerPuss
Active Member
- Posts
- 232
- Location
- Southport
Blimey, I actually have everything except the hazard warning lights working on the series 3!
I'm finally in the same boat (although mine has no hazards to worry about). Did my last bit of oily work at the weekend (oil + filter change and box/diff/grease lube). Now I am in the tidy and make pretty phase. It is ready for another winter of snow !
Uplyme Landy
New Member
- Posts
- 5
- Location
- Uplyme , Lyme Regis
I need to fit hazard lights to my series 3 does anyone have a wiring diagram?
jailon
Active Member
- Posts
- 409
- Location
- west yorkshire
If your s3 doesn't have them it's not a requirement unless after 1/4/1986
http://www.motuk.co.uk/manual_140.htm. Section 1.4.2
If they are fitted then they have to work
My view is, if you don't need them, dint fit them
http://www.motuk.co.uk/manual_140.htm. Section 1.4.2
If they are fitted then they have to work
My view is, if you don't need them, dint fit them
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
If mine don't work once I put the 109 back together I'm gonna remove the switch don't need them on my 74
don't need them on my 74Uplyme Landy
New Member
- Posts
- 5
- Location
- Uplyme , Lyme Regis
It appears that the fitting of hazards on a series 3 is more hassle than its worth there appears to be no simple way and no wiring diagrams. As there not required for a MOT I may well forget them just would be handy to have them. Need to sort brakes and steering!
pornstarmax
Active Member
- Posts
- 400
I binned mine, I figured, its going to go up in a massive ball of flames if it breaks down, so I won't need them....
mystery
Well-Known Member
- Posts
- 1,510
- Location
- BULKINGTON
Similar threads
