hello there! When I rebuilt my carb couldn’t get the accelerator pump out..I expected it to drop out. Anyway, I put it all back together but I have noticed a load of dead play. Should the spring/piston always be in contact with the leaver? It is only acting on it Having problems with misfire/rich running. Wondered if this could be part of the issue? I have lapped the carb so the 2 body parts meet well now. Thanks, Joe
With pic! Zenith carb accelerator pump question
- Thread starter joe_m
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 68,233
- Location
- The Wooly Witch
What type of Zenith is it ?
Have you tried compressing it to see if it'll 'pop' out ?
Have you got the top half of the carb off, so you can remove the emulsion lock ?
- Posts
- 68,233
- Location
- The Wooly Witch
- Posts
- 68,233
- Location
- The Wooly Witch
Check that there is no deep scoring where it came out, but it should be ok ...
