wirring

tyre man dave · Nov 13, 2011

In need of you help.

My 90 toy, wirings gone puff
looking for a 200tdi 90 wiring loom,
so i can get landy sorted
......gutted

wiltshire landyman · Nov 13, 2011

speak to mhm he will sort it for ya

mundungus · Nov 13, 2011

What do you mean gone puff?

You've got to give more detail. It might only be a small proble that costs a couple of quid to fix. Prematurely going for a full replacement loom is gonna cost quite a bit more I'd imagine.

bluehaze · Nov 13, 2011

How bad is gone puff?

They're quite easy to rebuild.

If you go for a replacement don't throw it.

tyre man dave · Nov 14, 2011

cheers mate.
will look them up
many thanks

tyre man dave · Nov 14, 2011

hi there.
the main wiring fuse holders inside bulkhead fused together.
wires are looking passed it.
thanks for quick reply

tyre man dave · Nov 14, 2011

hi there.
think its seen better days.
main fuse holders shorted out
wiring looks in a bit of a mess.
thanks
for a quick reply

tyre man dave · Nov 17, 2011

hi there.
got a 200tdi loom, its got a toad alarm spliced in.
can i cut tha alarm back out, will this cause any problams.

cheers
dave

wowa75 · Nov 17, 2011

Just done this myself on 110 CSW.
Earthed a live after fitting dash console and the heat was immense. Ran through main loom in seconds- needed complete replacement (after just spending a grand getting wiring sorted for MOT equivalent).
Anyway, main loom from Autosparks ran to about 300 quid. Caution: this main loom will require accessory loom plug ins, so know what you have and what you can salvage. My loom needed heated rear window loom and some mini looms off back of switches- these are seldom available now but can be sourced from salvage. I suspect very few vehicles have same wiring configuration due to numerous specs but everything can be added to the basic main loom from AS.
Refit was a bitch and needs full dash removal. Label up cooked loom, all terminals top/bottom before removing and compare with replacement then label up same.
Good luck!

wermy · Nov 17, 2011

Just in the middle of changing the loom in mine from glass to blade fuses.
It's a good time to fix those other things that needed doing for ages and splice in some additonal accessory feeds properly.

tyre man dave · Nov 27, 2011

Hi there.
Got a 200 tdi wiring loom , in the proses or fitting it
quick question
whitch wires go where into the back of the ignition barrel
2 large brown thick white thin red/white orange/white .
Did try to have a look at my 110 ignition barrel later type
many thanks

tyre man dave · Nov 27, 2011

Hi alan
how you getting on with rewire.
I,m doing alot of head scraching , i hate wirring

wirring

tyre man dave

Active Member

wiltshire landyman

I’m back

mundungus

Active Member

bluehaze

Well-Known Member

tyre man dave

Active Member

tyre man dave

Active Member

tyre man dave

Active Member

tyre man dave

Active Member

wowa75

Member

wermy

Member

tyre man dave

Active Member

tyre man dave

Active Member

Similar threads