Wire for Reversing Lamp P38

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

leachim

New Member
Posts
8
Hi

I want to wire in a reversing sensor to the reversing light on a 97 P38 2.5 deisel auto.

Not sure how to find it in the side panels in the boot

It just needs a 12v feed from this wire to the reversing sensor I have bought

Any help appreciated
 
I just found the wire that goes to the reversing lights and took the feed from that, been no trouble for 3 years, what i will do tomorrow is look to see how and what colour the wire was and get back to you .
 
There is a spare plug hanging from the loom at the rear l.h. side close to the sub woofer area. The plug has three wires attached..negative, 12V+ Ignition switched live and reverse lamp. It is primarily used for energising a relay for caravan power utilities and providing a supply via a 12S plug to the caravan reversing lights, if fitted.
 
There is a spare plug hanging from the loom at the rear l.h. side close to the sub woofer area. The plug has three wires attached..negative, 12V+ Ignition switched live and reverse lamp. It is primarily used for energising a relay for caravan power utilities and providing a supply via a 12S plug to the caravan reversing lights, if fitted.

There is a white plug hanging down in the compartment behind the passenger side rear lights, but it has 4 wires - are we talking about the same one ?
 
I dont have that plug on mine but if yours have then its a better idea than mine, thats got me thinking i will have another search to see if mine does have that plug
 
Remove the side panel which covers the sub woofer and CD player..that should give you enough space to have a good look around.
Regarding the plug, one of the wires is Black (Ground), use a meter or test lamp to check out the others.
 
Back
Top