Wipac LED Fault

Callum Brown · Jul 6, 2018

Hey all, recently brought full set of WIPAC LED lights (2 side lights, 4 indicators, 2 brake lights) fitted them this evening (and the new fuse thing behind the instrument panel) and all work except the 2 rear indicators tried swapping them with the front and they work on front but not on the back. Weird thing is if I put the old bulbs on the back they work fine again.... any ideas? 2004 90 TD5

neilly · Jul 6, 2018

why are you saying they do not work?

Have you tried reversing the lights polarity?

Cheers

Callum Brown · Jul 6, 2018

neilly said:
why are you saying they do not work?

Have you tried reversing the lights polarity?

Cheers

Heya, they just don’t come on with either hazards or indicators, but the old ones do, and I tried one from the back that didn’t work on the front and it worked.

How do I reverse the lights polarity, I’m not the most mechanically minded person

Flossie · Jul 6, 2018

Swop the two wires around, positive becomes earth, earth become positive.

Hicap phill · Jul 6, 2018

Have you set up the led indicator relay?

Callum Brown · Jul 6, 2018

Hicap phill said:
Have you set up the led indicator relay?

I believe so, is that the little fuse sized block, sits in behind the instrument panel.

Callum Brown · Jul 6, 2018

Flossie said:
Swop the two wires around, positive becomes earth, earth become positive.

Thank you I’ll give it a test with some fuse wire tomorrow

TheQ · Jul 7, 2018

Fuse wire?
All you need do is swap the connections over to the leds at the rear

Wipac LED Fault

Callum Brown

Member

neilly

Well-Known Member

Callum Brown

Member

Flossie

Well-Known Member

Hicap phill

Well-Known Member

Callum Brown

Member

Callum Brown

Member

TheQ

Well-Known Member

Similar threads