Window rubber surrounds

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
roshe25

roshe25

Active Member
Posts
171
Location
Cheshire
Hi
The window rubber surrounds have started to bubble and I am worried that the metal behind them is rusting,I would like to replace them but do not know where to get them from, I do not want to go to main dealer.
Any help would be appreciated thanks.
 
Trip to the scrappy for a nicer set £10. Just replaced the two rear door rubbers on mine, don’t believe what it says in rave, you don't need the windows out first, you only need to get them all the way down, not always easy in a scrappy with no battery, just take the door cards off and unbolt the window glass from the mechanism to drop it down. Start at the bottom of the seal where the join is and lift that part first, work your way round the open window to the top, you then need to pull the seal to the outside and push the window to the inside, pull the quarterlight window forwards at the top to rotate the whole thing out of the door. It might sound hard but the only tough bit is getting the new rubbers from the scrap car. If you need pictures I will post how I did it and all will become clear, from taking the old rubber off and cleaning and refitting is only a 15min job per side and no door strip down involved on your car.
 
The seams start to blister and bulge

When removed its not a pretty picture, get it checked asap.

Sand down any corrosion with a fine tool like a dremel and prime/paint, refit the old seal with a bead of general purpose silcone sealant (up inside the fold of the seam itself)......that will keep it water-tight for many more years

The seals are tricky to refit perfectly, they tend to kink/warp a little, hard to beat perfectly straight again
 

Attachments

  • Rust on window seam.jpg
    Rust on window seam.jpg
    75.9 KB · Views: 2,499
  • Rust on doors.jpg
    Rust on doors.jpg
    75.6 KB · Views: 1,795
Last edited:
kan0 said:
Trip to the scrappy for a nicer set £10. Just replaced the two rear door rubbers on mine, don’t believe what it says in rave, you don't need the windows out first, you only need to get them all the way down, not always easy in a scrappy with no battery, just take the door cards off and unbolt the window glass from the mechanism to drop it down. Start at the bottom of the seal where the join is and lift that part first, work your way round the open window to the top, you then need to pull the seal to the outside and push the window to the inside, pull the quarterlight window forwards at the top to rotate the whole thing out of the door. It might sound hard but the only tough bit is getting the new rubbers from the scrap car. If you need pictures I will post how I did it and all will become clear, from taking the old rubber off and cleaning and refitting is only a 15min job per side and no door strip down involved on your car.
Click to expand...
pics would be great as mine have started to bubble up and would like to replace them thanks
 
kan0 said:
Trip to the scrappy for a nicer set £10. Just replaced the two rear door rubbers on mine, don’t believe what it says in rave, you don't need the windows out first, you only need to get them all the way down, not always easy in a scrappy with no battery, just take the door cards off and unbolt the window glass from the mechanism to drop it down. Start at the bottom of the seal where the join is and lift that part first, work your way round the open window to the top, you then need to pull the seal to the outside and push the window to the inside, pull the quarterlight window forwards at the top to rotate the whole thing out of the door. It might sound hard but the only tough bit is getting the new rubbers from the scrap car. If you need pictures I will post how I did it and all will become clear, from taking the old rubber off and cleaning and refitting is only a 15min job per side and no door strip down involved on your car.
Click to expand...

Hi
Thanks for that info,pics would be great I looked at the rave disc and it looked really complicated.
 
Start with the window glass all the way down. Then gently push the glass in and pull the rubber out the way, easy with the fingers but a spray of silicon helps, make sure you flip it out all the way to the bottom or it will stop the whole thing rotating as it will hit the glass.
7105646429_0b9d1b558c.jpg


Then start at the bottom and lift the seal from the door, there is a join in the seal if you look, pull the top bit up enough to then lift the bottom part past it, you might need a wide screw driver of lever to get it started but it's not too hard. work your way round the seal to the top pulling it from the door and leave it on the outside. Now if you have flipped the seal and window glass like i said at the start all you need to do is push/pull the small glass and seal forwards at the top and it will rotate until you can lift it all out.
7105646585_8f0190c827.jpg

You can guess how to change the small glass over to the new seal, but a spay of silicon helps alot when putting the whole thing back on the car, just work back through the instructions. 15 mins easy depending how much cleaning you do.
 
Hi KanO
Thank you for reply,That looks quite easy according to your pics,I am going to see if I can get new surrounds and will put them in your way.
Again thanks.
 
I have this problem apparently very common I priced them up from hunters Southampton £56 I needed 2 front but as the n/s/f door was rusted and window reg was broken I bought another with it all on and even the colour was the right one 👍 cost me £80 not bad price that. However still have to pay for o/s/f but even with that still saved a packet.
 
Question for Archie382 was the price quoted from Hunters for one window, and do you have the part numbers please?
 
Just bought my first Freelander. This is the first job to tackle if I can source parts. Hopefully as easy as previously said :)
 
You must log in or register to reply here.

Similar threads

T
Rubber Car Mats & Boot liner
Replies
5
Views
431
Madmustang
Madmustang
M
Window surrounds
Replies
7
Views
785
Rubberknees
Rubberknees
J
External Window Seal
Replies
0
Views
424
jamesneilson268
J
J
Freelander 1 Tailgate door
Replies
4
Views
1K
joel4507
J
Sulcalibur
Driver window won’t go up
Replies
4
Views
624
xDParis64
xDParis64
Back
Top