P38A Window deflectors..

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Mark Piercy said:
Anybody got window deflectors on their bus?
How have they faired?
Make?
Easy to fit and solid? :D
Click to expand...
I've had some on most of my cars, they are easy enough to fit but not sure I'll put a set on the p38 I always feel like the windows don't seal quite as well and you end up with a bit of wind noise or sometimes I think it lets a bit more moisture in because of it. I've always used the Team Heko ones.
 
Khemitude said:
I've had some on most of my cars, they are easy enough to fit but not sure I'll put a set on the p38 I always feel like the windows don't seal quite as well and you end up with a bit of wind noise or sometimes I think it lets a bit more moisture in because of it. I've always used the Team Heko ones.
Click to expand...
Heko, that's the name I couldn't remember. Thanks lar;)
 
Datatek said:
Will look tomorrow if it stops raining. If you want them you can have them for the cost of postage.
Click to expand...
Your a flipping star mate and thank you :)
It's been blowing a right gale here today. The garage doors are shut up tight.... And there's more rain tomorrow at this end:rolleyes:
 
Mark Piercy said:
Thanks Keith, sorry. See how they're fitted, maybe a one time fit?
Click to expand...
Should be some metal push clips that you push between the the deflector and window channel should be able to pull them out with a flat screw driver though will probably be a little fiddly getting them out as it is quite a tight fit, they also have double sided tape on the edges so you will probably want to stick some fresh on the edge to be fair I’ve never found the tape that come on them brilliant anyway.
 
Mark Piercy said:
Your a flipping star mate and thank you :)
It's been blowing a right gale here today. The garage doors are shut up tight.... And there's more rain tomorrow at this end:rolleyes:
Click to expand...
It keeps hissing down but I have had a quick look. I only have them for the front windows. It looks like they are just held in place by double sided tape and the fact that they effectively go into 4 edges and have to be sprung into place. I'll know for sure when I can drop the window. I'll get back to you ASAP.
 
Khemitude said:
I've had some on most of my cars, they are easy enough to fit but not sure I'll put a set on the p38 I always feel like the windows don't seal quite as well
Click to expand...

Bought one for the sunroof on my RRC several years ago, spent ages fitting it (standing on the passenger seat with my upper torso above the roof, only to find that the sunroof wouldn't fully close with it in place .. DOH !
Sent it back & did get a full refund, seller stated 'never known that happen before' Precious little compensation for the 2 hours I spent on the b....y thing :(
 
Datatek said:
It keeps hissing down but I have had a quick look. I only have them for the front windows. It looks like they are just held in place by double sided tape and the fact that they effectively go into 4 edges and have to be sprung into place. I'll know for sure when I can drop the window. I'll get back to you ASAP.
Click to expand...
Thank you Keith :)
 
You must log in or register to reply here.

Similar threads

Cornishdefender
Buffeting wind noise with 1 window open
Replies
12
Views
1K
Alibro
Alibro
seldom
N/S rear window won't go up
Replies
2
Views
277
seldom
seldom
Entwhistel
Rear window
Replies
4
Views
171
Entwhistel
Entwhistel
ar1g3
P38A Weird antenna
Replies
7
Views
878
ar1g3
ar1g3
David Nimrod
110 sliding window question.
Replies
7
Views
713
David Nimrod
David Nimrod
Back
Top