Will these Alloys fit my 1996 P38..?

AndyP · Dec 29, 2006

Hello Gentlemen..

Been offered these alloys for my 1996 'P' reg 2.5DSE..

They are Genuine Land Rover 19inch alloys.. Rim width 8J with an offset of 19.. The guy says he has had them on his 2000 DSE P38.. He says he never had to add spacers or nothing..

Im just a little concerned as I believed the new shape RR alloys wouldnt fit the P38..

Any help would be greatly apprieciated..

Kind Regards..
Andy.

rewmer · Dec 29, 2006

Simple answer is yes. But, you will need a set of centering rings and a new set of nuts from a later model.

Bigstoo · Dec 29, 2006

fyi i recently bought 18" twin spokes (from a 2004 vogue) for my 96 rangey and i bought the centre spiggots and new nuts for about £50 from ebay. i also splashed out an extra £30 on a new set of locking wheel nuts.

AndyP · Dec 29, 2006

Bigstoo said:
fyi i recently bought 18" twin spokes (from a 2004 vogue) for my 96 rangey and i bought the centre spiggots and new nuts for about £50 from ebay. i also splashed out an extra £30 on a new set of locking wheel nuts.

Was just going to ask 'where from' and 'how much'.. Suppose they are available from Land Rover dealers but mega bucks..?

Bigstoo · Dec 30, 2006

the 18" twin spokes? i bought them on ebay for £200 quid. Twin Spokes & Hurricanes tend to go for around the £180 - £250 mark.

Will these Alloys fit my 1996 P38..?

AndyP

New Member

rewmer

Well-Known Member

Bigstoo

New Member

AndyP

New Member

Bigstoo

New Member

Similar threads