Wide Wheel Arches

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

wiggsy2008

Member
Posts
67
Location
Worcestershire
Evening all,

I picked up some wide +2 wheel arches the other day. Now the issue is the only way I can see to fit them is to cover some of the fuel filler cap area.

Has anyone had this before? Also I am assuming the idea is to fit mark off the body and trip the body up to match?

I can get some pictures in the morning if that helps.

Rich
 
I think you can get away without encroaching on the Diesel cutout too much, though it mite depend on the make, my mates were fitted a bit higher then mine but squiffy to avoid the cutout, he had to re-fit them over the corner of the cut out to make them square.


IMG_20140414_162322_zpsb41c9ead.jpg


Mine were fitted square only just touching the cutout.

IMG_20140414_162258_zps5a714244.jpg


sorry pics are a bit ****e, but you get the idea :p
 
i had the same problem but got them to fit with just a small amount over the fuel filler hole will see if i have a pic
 
Well I go them on in the end.

Overlap isnt too bad to be honest, worrying about nothing!

Ill get a better picture of the overlap tomorrow.
 

Attachments

  • IMG_20140421_153313.jpg
    IMG_20140421_153313.jpg
    227.1 KB · Views: 155
Back
Top