Who said swapping door skins was easy??

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
james6546

james6546

Well-Known Member
Posts
3,043
Location
Ashbourne
I've calmed down a bit now so thought I would ask on here. I tried to do the door skins over the weekend, was going easily until I get to the bit where the skins wrap around the window edge.

Tried to get them out, but couldn't get the plastic inserts around the glass out, ended up smashing them (£100), then I still couldn't get to the edge to lever the skin edge out due to the window channel being in the way. Do I need to remove the glass too??

Also, what have people used to bend the edges back around?
 
Marmaduke said:
I can't see how you ever thought it would be easy James, you're trying to do by hand what land rover use a mayhoosive machines to do :oops:
Click to expand...
Someone on here said it was easy, it was't going too badly at the start...

Wish I had bought the £3k ones from Keith Gott!!
 
To skin a door...

Grind around the edge of the door sides) just enough so you can just see the two parts of skin (wrapped bit & door) and a small black line appearing(the frame)

Pull the skin away from the frame (it might be gluded so a small flat chisel is useful).

To replace the skin

To flip the new edge over, take flat panel beating hammer and a weight (a lump of metal) hold the weight on the skin (door side to support the area you are bending over) and lightly tap the edge over all around the door,

Personally I would flip the edge up about 25 degrees all the way about, then 45, then to 90, etc...

Don't use grips to bend it over or to flatten it down as it ends up giving a wobbly edge. Or trying to flip to much of the edge over in one, as this will also make it wobbly.

I need to reskin my doors so when I have some room in the workshop I'll take some pictures and write a guide.
 
My skins came off ok, James. They were new doors though. Britpart! All the furniture, seals etc came off the old doors easily too. :oops:
 
stewd said:
To skin a door...

Grind around the edge of the door sides) just enough so you can just see the two parts of skin (wrapped bit & door) and a small black line appearing(the frame)

Pull the skin away from the frame (it might be gluded so a small flat chisel is useful).

To replace the skin

To flip the new edge over, take flat panel beating hammer and a weight (a lump of metal) hold the weight on the skin (door side to support the area you are bending over) and lightly tap the edge over all around the door,

Personally I would flip the edge up about 25 degrees all the way about, then 45, then to 90, etc...

Don't use grips to bend it over or to flatten it down as it ends up giving a wobbly edge. Or trying to flip to much of the edge over in one, as this will also make it wobbly.

I need to reskin my doors so when I have some room in the workshop I'll take some pictures and write a guide.
Click to expand...

Al2O3 said:
My skins came off ok, James. They were new doors though. Britpart! All the furniture, seals etc came off the old doors easily too. :oops:
Click to expand...

Thanks both, makes me feel better. I'll try and continue today.

@stewd, did you leave the window channel in still? If so how did you get to the metal bent over?
 
Guide to skinning a door:
1) remove skin from old frame
2) get old frame welded
3) try to get galvanised steel to bend around new frame
4) make a bodge job really badly as the steel skins won't bend
5) drive to paddocks and buy two complete doors for £660

I give up
 
james6546 said:
Guide to skinning a door:
1) remove skin from old frame
2) get old frame welded
3) try to get galvanised steel to bend around new frame
4) make a bodge job really badly as the steel skins won't bend
5) drive to paddocks and buy two complete doors for £660

I give up
Click to expand...
And there was me thinking you could do mine:D
 
Seriously, don't go with the steel ones unless you have some kind of press.

Unless you fancy buying mine...

If I could set a steel door frame on fire I would do
 
I'll get some pics tomorrow. New doors are on and its ready for paint now.

I'll be putting them up for sale, one skin is as new, the other one isn't so much. One frame is good, the other is average. I've also got two bottom repair sections for a rear door as I mucked up and ordered them by mistake!
 
james6546 said:
I'll get some pics tomorrow. New doors are on and its ready for paint now.

I'll be putting them up for sale, one skin is as new, the other one isn't so much. One frame is good, the other is average. I've also got two bottom repair sections for a rear door as I mucked up and ordered them by mistake!
Click to expand...
James how much did you pay for the doors in the end?!
 
popcorn.gif
 
You must log in or register to reply here.

Similar threads

G
Water dripping out of tailgate - Is this normal?
Replies
9
Views
389
saxavordian
saxavordian
R
Galvanised doors
Replies
4
Views
963
R1nut
R
D
Alpine Windows
Replies
2
Views
528
David Leech
D
S
glazing seal for windscreen
Replies
10
Views
1K
sprie
S
T
Improving the doors
Replies
5
Views
983
300bhp/ton
300bhp/ton
Back
Top