P38A White smoke at start.....every start

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Photo as requested
IMAG0913.jpg
 
It's not standard whatever it is. Obviously had something mounted on it at some stage but what i have no idea. Maybe a wigwam for winding the moon up with. :D:D
 
It is on LPG at the moment, and was (on a different system) when I bought it. Didn't pay too much attention to what was part of that install as it was old and rubbish. The main contribution it (the old system) made was having a rigid filler pipe which, along with 2 cable ties, was the only thing holding the rear bumper in place. :eek:
Update on the job: I've got the LH head off and I would gladly part with a kidney to get the RH one off. One bloomin' bolt won't budge for love, money or promise of a kidney.
 
Zorro587 said:
It is on LPG at the moment, and was (on a different system) when I bought it. Didn't pay too much attention to what was part of that install as it was old and rubbish. The main contribution it (the old system) made was having a rigid filler pipe which, along with 2 cable ties, was the only thing holding the rear bumper in place. :eek:
Update on the job: I've got the LH head off and I would gladly part with a kidney to get the RH one off. One bloomin' bolt won't budge for love, money or promise of a kidney.
Click to expand...
Put in your location, if money is involved.:D:D
 
Zorro587 said:
It is on LPG at the moment, and was (on a different system) when I bought it. Didn't pay too much attention to what was part of that install as it was old and rubbish. The main contribution it (the old system) made was having a rigid filler pipe which, along with 2 cable ties, was the only thing holding the rear bumper in place. :eek:
Update on the job: I've got the LH head off and I would gladly part with a kidney to get the RH one off. One bloomin' bolt won't budge for love, money or promise of a kidney.
Click to expand...

Breaker bar and easy does it. I split one socket trying.
 
wammers said:
Crap sockets? :D:D
Click to expand...

It was an old Halfords one. So old in fact that it didn't even have Halfords written on it. I took it back as they say lifetime guarantee these days but he said I couldn't prove it was a Halfords one. Fair enough. So went online and bought a replacement. Cannot remember the make but they got a decent write up. Chinese sounding name. Teng?
 
Grrrrrr said:
It was an old Halfords one. So old in fact that it didn't even have Halfords written on it. I took it back as they say lifetime guarantee these days but he said I couldn't prove it was a Halfords one. Fair enough. So went online and bought a replacement. Cannot remember the make but they got a decent write up. Chinese sounding name. Teng?
Click to expand...

Teng are good and Swedish. ;)
 
Update: The heads are off and ready to go for checking/skimming.
That's it? Oh, if only dear reader. The first 19 head bolts came out a treat. The LH head was off Sunday morning. Odyssey came round and we shared ownership tales of coolant loss and head gaskets. He left about lunch.
This evening at 16.55, four and a half days later, I got further.
Bolt number 20 decided to mess around with my head. It was the one at the back of the RH head which lives just below where the heater pipes come through the bulkhead. And it started to round off. Right, need to make special Tool No.1 to try and keep the socket applying downward pressure onto the bolt head. Monday evening saw the fabrication of ST No.1 but it was a failure. I had already pre-empted some woe though and had ordered a new deep socket from Hebay. It'll be here Tuesday or Wednesday.
Tuesday didn't fill me with glee as the postie had passed our house by. "I'll check the approximate delivery date again" thought I, but logging onto my purchase history on Hebay found ...... nothing. No sign of said socket being bought. But I've had an email from Paypal. Checked the email to find I had indeed paid for it, but what I'd missed on Sunday was that No.1 son, the first in line to the family overdraft, had been logged into the Hebay when I did the clicking thing....and the socket was being delivered to his girlfriend's flat.
She lives in London. bu99er.
Once the mushroom cloud of my ire had subsided, No.1 son informed me that she was driving up on Wednesday anyway and would bring it with her. This was a lie but No.1 son went behind my back and drove halfway to the moon to meet said girlfriend and retrieve my socket.
Last night at 10.15 he returned and presented the socket to me. No time like the present. And still no good. Right, sleep is for wimps.
Plan B: use an assortment of drills from 4mm - 10mm, weaken the head and shear it off flush. Lots of careful drilling ensued but the head refused to shear. Sleep came at 02.45 this morning.
Screwfix happened at 16.15 this afternoon and having been relieved of some cash at bayonet point I was presented with a shiny new set of Irwin broken/rounded/generally knackered removal sockets, the largest of which is 16mm.
A judicious application of caffeine and nicotine was followed by a 'crack', a loose head and the remains of a head bolt that could be unscrewed by hand.
I will sleep well tonight and tomorrow plan to verily skip to the head sorter-outerers.
Update will follow.
(Also noticed the sun seems to be out longer and stronger since my cloud generator has been parked up. Coincidence?)
 
Zorro587 said:
Update: The heads are off and ready to go for checking/skimming.
That's it? Oh, if only dear reader. The first 19 head bolts came out a treat. The LH head was off Sunday morning. Odyssey came round and we shared ownership tales of coolant loss and head gaskets. He left about lunch.
This evening at 16.55, four and a half days later, I got further.
Bolt number 20 decided to mess around with my head. It was the one at the back of the RH head which lives just below where the heater pipes come through the bulkhead. And it started to round off. Right, need to make special Tool No.1 to try and keep the socket applying downward pressure onto the bolt head. Monday evening saw the fabrication of ST No.1 but it was a failure. I had already pre-empted some woe though and had ordered a new deep socket from Hebay. It'll be here Tuesday or Wednesday.
Tuesday didn't fill me with glee as the postie had passed our house by. "I'll check the approximate delivery date again" thought I, but logging onto my purchase history on Hebay found ...... nothing. No sign of said socket being bought. But I've had an email from Paypal. Checked the email to find I had indeed paid for it, but what I'd missed on Sunday was that No.1 son, the first in line to the family overdraft, had been logged into the Hebay when I did the clicking thing....and the socket was being delivered to his girlfriend's flat.
She lives in London. bu99er.
Once the mushroom cloud of my ire had subsided, No.1 son informed me that she was driving up on Wednesday anyway and would bring it with her. This was a lie but No.1 son went behind my back and drove halfway to the moon to meet said girlfriend and retrieve my socket.
Last night at 10.15 he returned and presented the socket to me. No time like the present. And still no good. Right, sleep is for wimps.
Plan B: use an assortment of drills from 4mm - 10mm, weaken the head and shear it off flush. Lots of careful drilling ensued but the head refused to shear. Sleep came at 02.45 this morning.
Screwfix happened at 16.15 this afternoon and having been relieved of some cash at bayonet point I was presented with a shiny new set of Irwin broken/rounded/generally knackered removal sockets, the largest of which is 16mm.
A judicious application of caffeine and nicotine was followed by a 'crack', a loose head and the remains of a head bolt that could be unscrewed by hand.
I will sleep well tonight and tomorrow plan to verily skip to the head sorter-outerers.
Update will follow.
(Also noticed the sun seems to be out longer and stronger since my cloud generator has been parked up. Coincidence?)
Click to expand...

What socket have you been using on your head bolts. They are NOT 16 mm they are 5/8" AF. If you used a 16 mm twelve point socket, knackering bolt heads up on any that are tight is assured. You MUST use 5/8" AF single hex sockets on these at all times.
 
wammers said:
What socket have you been using on your head bolts. They are NOT 16 mm they are 5/8" AF. If you used a 16 mm twelve point socket, knackering bolt heads up on any that are tight is assured. You MUST use 5/8" AF single hex sockets on these at all times.
Click to expand...
I've got 6 and 12 point sockets. I never use the 12's on anything tight. Lesson learned many years ago.
 
Love the update. No chuffing way is my son ever accessing my eBay account. I'd have an arctic load of plastic dinosaurs within 24 hours.

Can you not check the heads with an engineer's rule and feeler gauges?
 
You must log in or register to reply here.

Similar threads

JockHiltz
White smoke on start up
Replies
5
Views
630
Anaconda
A
S
Black and White Smoke 1988 90
Replies
6
Views
231
tottot
tottot
G
Disco 2 TD5 white smoke at idle
Replies
18
Views
669
GaryWrench
G
A
Freelander 1 WHITE smoke cutting out after few seconds starting
2
Replies
20
Views
2K
Ian M in France
Ian M in France
G
Diagnosing black smoke under load on 300tdi?
Replies
3
Views
344
D1Nut
D1Nut
Back
Top