Whistle....

67Rob · May 11, 2015

....coming from under passenger side bonnet.
It only happens when warmed up and only after accelerating (take foot of go pedal and it starts) or at idle.

Any suggestions?

Datatek · May 11, 2015

67Rob said:
....coming from under passenger side bonnet.
It only happens when warmed up and only after accelerating (take foot of go pedal and it starts) or at idle.

Any suggestions?

Engine type? Vehicle??

67Rob · May 11, 2015

Datatek said:
Engine type? Vehicle??

Sorry, P38 4.6 Thor, petrol.

wammers · May 12, 2015

Maybe a leaking vac pipe does cruise work?

67Rob · Jun 21, 2015

wammers said:
Maybe a leaking vac pipe does cruise work?

Late reply but only had a chance to try out cruise control yesterday.

No, it's not working.

wammers · Jun 21, 2015

67Rob said:
Late reply but only had a chance to try out cruise control yesterday.

No, it's not working.

Fix vac leak repair cruise simples.

67Rob · Jun 21, 2015

wammers said:
Fix vac leak repair cruise simples.

Cheers.

PPP38vouge · Jun 21, 2015

Hi,
Replaced all my cruise control vacuum hoses from pedal to bellows with silicon hose, can't remember if it's 4or6 mm, good tight fit with no more split ends.

67Rob · Jun 21, 2015

Well, I've found what I hope is the problem....

....now cut clean and connected.

Grrrrrr · Jun 21, 2015

67Rob said:
Well, I've found what I hope is the problem....

....now cut clean and connected.

Whistling fixed? Cruise fixed?

67Rob · Jun 22, 2015

Grrrrrr said:
Whistling fixed? Cruise fixed?

Unfortunately not.
The whistling was worse last night on way home. It seems to be coming more from inside under the passenger side dash.

Then this morning and all day (so far) whistling gone. But cruise still no worky.

Datatek · Jun 22, 2015

67Rob said:
Unfortunately not.
The whistling was worse last night on way home. It seems to be coming more from inside under the passenger side dash.

Then this morning and all day (so far) whistling gone. But cruise still no worky.

So another pipe split? There is one that goes to the brake peddle.

PPP38vouge · Jun 22, 2015

As Datatek says plus check electrical connection under bellow and also the rubber bellow itself.

67Rob · Jun 22, 2015

Being none too familiar with this, where are the bellows situated and is there a diagram to hand anywhere?

Datatek · Jun 22, 2015

67Rob said:
Being none too familiar with this, where are the bellows situated and is there a diagram to hand anywhere?

RAVE has a trouble shooting guide i believe

PPP38vouge · Jun 22, 2015

The bellow is the the black rubber dome where the pipes connect into, if you remove the bracket from the EAS box there is a electrical conector underneath that is worth checking, also if you suck on the rubber tube that connects to the below it should fold in if not the bellow may be split.

67Rob · Jun 24, 2015

Once again, thanks for all the help.

Next day the whistle has gone and the cruise control is working fine.

Phucked if I know why but (as always) if it's working, leave well alone.

wammers · Jun 24, 2015

67Rob said:
Once again, thanks for all the help.

Next day the whistle has gone and the cruise control is working fine.

Phucked if I know why but (as always) if it's working, leave well alone.

Listen to uncle Tony you know it makes sense.

67Rob · Jun 24, 2015

wammers said:
Listen to uncle Tony you know it makes sense.

raise:

tomcat59alan · Jun 24, 2015

wammers said:
Listen to uncle Tony you know it makes sense.

I put it down to his Roger Whitaker CD.

Whistle....

Active Member

Well-Known Member

Active Member

No longer with us, RIP

Active Member

No longer with us, RIP

Active Member

Active Member

Active Member

Technician, Bodgit & Scarper Ltd

Active Member

Well-Known Member

Active Member

Active Member

Well-Known Member

Active Member

Active Member

No longer with us, RIP

Active Member

Well-Known Member

Similar threads