johndregg
Active Member
- Posts
- 178
- Location
- Belfast Ireland
SU to EFI conversion. Which throttle cable will I need. It's a defender.
Which throttle cable?
- Thread starter johndregg
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
johndregg
Active Member
- Posts
- 178
- Location
- Belfast Ireland
So, I shouldn't ask for advice on the forum then?? I should just assume that nobody will want to share their knowledge in order to help other members.
I'm quite capable of making a throttle cable, but just thought that one of the many advocates of EFI over carbs might be able to save me some time.
MattMatt
Active Member
- Posts
- 122
- Location
- Swindon - ish
RR Efi should fit - the pedal end is a clevis and pin on both so it's the other end that is different. I think the efi has a longer cable length between the adjuster and the clevis. On a Series you have to make one up as the whole throttle pedal is completely different with rods and levers
johndregg
Active Member
- Posts
- 178
- Location
- Belfast Ireland
Thanks matt.
I'd already measured the distance between the adjuster and pin on the efi mechanism and realised I'd need a longer cable. I just wasn't sure that RRC and Disco had the same pedal end.
I have a 3m length of Vespa gear cable that I can use as a lash up in the mean time though.
I'd already measured the distance between the adjuster and pin on the efi mechanism and realised I'd need a longer cable. I just wasn't sure that RRC and Disco had the same pedal end.
I have a 3m length of Vespa gear cable that I can use as a lash up in the mean time though.
Similar threads
