L405 Which L405 RangeRover? Pre-facelift 2017 Autobiography or Post-facelift Vogue?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

dasloboq

New Member
Posts
1
Location
Essex
For the money I want to spend and approx 50,000 miles on the clock, I can get either a 2017 Autobiography pre-facelift (so the older infotainment system) or a post face-lift 2018 Vogue.

I'm leaning towards to the pre-facelift autobiography.

I've never owned a RR before - I currently drive a 10 year old BMW 5 series.

I'm only looking at the 3L Diesels - that's plenty enough performance and I don't think the lower fuel economy and tax make the 4.5L or 5L attractive to me.

Any thoughts/advice/recommendations?

Priority for all passengers is luxury all round. Apple car play would be a nice to have.

Thanks!
 
Welcome to the mad house. Whichever you choose, don't forget to allow at least £3K for fixing the inevitable faults and don't buy any Range Rover with an existing fault. Test every electronic and mechanical function including checking it will go into low range etc.
 
+1 on what Data says and check every electronic gizzmo thoroughly.

Welcome to the Looney zone by the way:)
 
3L diesel, is that still the dodgy one? Or has it been replaced?

The one that snaps cranks? Not sure but gstuart has posted a lot on those engines although not always in the Rangie section. I wouldn't risk it, not if I could have one with that Jag v8 in it. Unless you do serious milage the difference in mpg isn't that noticeable.
 
The 2.7 snapped them later in life and some of the 3.0 broke earlier. The vid @gstuart posted is pretty informative ;)


Indeed all are affected from 2004 right up into the discovery 5 , including the Range Rover sports ref the 2.7 TDV6 and the 3.0 SDV6 engines

alas there doesn’t seem to be 100% proof of what causes it, even ones that have all there filters / oils changed every 6 x months , from a few as low as 5,000 miles all the way up and some happening where the engine failed twice to the same person after being replaced with a brand new genuine Land Rover engine, seen many figures of 10k + being quoted from dealers
 
Last edited:
Indeed all are affected from 2004 right up into the discovery 5 , including the Range Rover sports ref the 2.7 TDV6 and the 3.0 SDV6 engines

alas there doesn’t seem to be 100% proof of what causes it, even ones that have all there filters / oils changed every 6 x months , from a few as low as 5,000 miles all the way up and some happening where the engine failed twice to the same person after being replaced with a brand new genuine Land Rover engine, seen many figures of 10k + being quoted from dealers
I understand it's caused by the main bearing shells rotating and cutting off the oil due to the anti rotation tag being omitted.
 
I understand it's caused by the main bearing shells rotating and cutting off the oil due to the anti rotation tag being omitted.

hiya

must confess also read where the crank can just snap without the shells spinning , along with it snapping in the same place when they do
 
i also think failure have been seen where shells havent spun and no signs of discolouration to suggest overheating/seizing

Plus 1 as also heard that where the crank can just snap and when it does it’s in the same place each and every time
 
@gstuart, the video you posted explains a lot of reasons why they can and do break. Heat treating, pulsed oil feed and the crank bearing combined surface total is only around 170mm compared to a 6cyl in line toyota engine that has 240mm (figures not exact from memory) too many reasons for modern engineering!! :eek:
 
@gstuart, the video you posted explains a lot of reasons why they can and do break. Heat treating, pulsed oil feed and the crank bearing combined surface total is only around 170mm compared to a 6cyl in line toyota engine that has 240mm (figures not exact from memory) too many reasons for modern engineering!! :eek:

I think the reason is simple: they tried to make the engine has compact as possible and over-cooked it. In a light car without much stress it gets away with it but in a heavy car where the engine is working harder it starts to fail.
 
I think the reason is simple: they tried to make the engine has compact as possible and over-cooked it. In a light car without much stress it gets away with it but in a heavy car where the engine is working harder it starts to fail.
and they over tuned it, i believe the engine is used with less power output in other cars without issues
 
Maybe there are 2 problems but no anti rotation tags is IMO asking for trouble.

@gstuart, the video you posted explains a lot of reasons why they can and do break. Heat treating, pulsed oil feed and the crank bearing combined surface total is only around 170mm compared to a 6cyl in line toyota engine that has 240mm (figures not exact from memory) too many reasons for modern engineering!! :eek:

I think the reason is simple: they tried to make the engine has compact as possible and over-cooked it. In a light car without much stress it gets away with it but in a heavy car where the engine is working harder it starts to fail.

many thks as always , alas I know u all have considerably more engine knowledge than myself , so indeed watching a video with very technical details in it will make a lot more sense than myself

plus 1 with regards to the NM output of the engine in comparison to the others , think the SDV6 is 600 NM

At least one saving grace is the oil pump issue is well documented as a failure point throughout multiple forums

thks again as always for sharing such fantastic knowledge as I do like to learn new things,

fingers crossed one day I’ll be able to move onto a petrol D3


CITROEN

  • CITROÈN C6 Saloon (Year of Construction 09.2005 - 12.2012, 204 - 241 PS, Diesel)
  • CITROËN C5 III Saloon (Year of Construction 02.2008 - ....., 204 - 241 PS, Diesel)

> CITROEN C5 III Estate (RW) (Year of Construction 02.2008 - ..., ., 204 - 241 PS, Diesel)


JAGUAR

  • JAGUAR S-Type (X200) (Year of Construction 06.2004 - 10.2007, 207 PS, Diesel)
  • JAGUAR XJ Saloon (X350, X358) (Year of Construction 10.2005 - 03.2009, 207 PS, Diesel)
  • JAGUAR XF Saloon (X250) (Year of Construction 03.2008 - 04.2015, 207 - 275 PS, Diesel)
  • JAGUAR XJ Saloon (X351) (Year of Construction 10.2009 - ..., .,. 275-300 PS, Diesel)
  • JAGUAR XF Sportbrake (X250) (Year of Construction 09.2012 - 04.2014, 241 - 275 PS,
    Diesel)
  • JAGUAR XF Saloon (X260) (Year of Construction 05.2015 - .., 300 PS, Diesel)
  • JAGUAR F-Pace (X761) (Year of Construction 09.2015 - .., 300 PS, Diesel)
  • JAGUAR XF Sportbrake (X260) (Year of Construction 07.2017 - ..300 PS, Diesel)


LAND-ROVER

  • LAND ROVER Range Rover III (L322) (Year of Construction 03.2002 - 08.2012, 177 PS,
    Diesel)
  • LAND ROVER Discovery III (L319) (Year of Construction 07.2004 - 09.2009, 190 - 200 PS, Diesel)
  • LAND ROVER Range Rover Sport (L320) (Year of Construction 02.2005 - 03.2013, 190 -
256 PS, Diesel)

  • LAND ROVER Discovery IV (L319) Year of Construction 09.2009 - ..., 190 - 272 PS, Diesel)
  • LAND ROVER Range Rover IV (L405) (Year of Construction 08.2012 - ..., 211 - 340 PS,
    Diesel. Diesel/Electro)
  • LAND ROVER Range Rover Sport (L494) (Year of Construction 04.2013 - ..., 211 - 340 PS, Diesel, Diesel

  • LAND ROVER Discovery V (L462) (Year of Construction 09.2016 - ..., 211 - 306 PS, Diesel)
  • LAND ROVER Range Rover Velar (L560) (Year of Construction 03.2017 - ..., 275 - 300 PS, Diesel)
  • LAND ROVER Discovery IV VAN (L319) (Year of Construction 01.2011 - 12.2017, 211 - 256
    PS, Diesel)

  • PEUGEOT
    • PEUGEOT 607 Saloon (Year of Construction 12.2004 - 07.2011, 204 PS, Diesel)
    • PEUGEOT 407 Saloon (Year of Construction 10.2005 - 12.2010, 204 PS, Diesel)
    • PEUGEOT 407 SW Year of Construction 10.2005 - 12.2010, 204 PS, Diesel)
    • PEUGEOT 407 Coupe (Year of Construction 10.2005 - ..., 204 - 241 PS, Diesel)
 
Back
Top