Which adhesive for trim on wing

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Archies

Archies

Active Member
Posts
178
Location
Stoke on Trent
Hi does anyone know of a decent glue that will stick the little black trim on on the wing, its the trim that runs down the lenght of the car but ive had a new wing on and im not sure what to stick it back on with.


Cheers

Archie
 
Acc. to rave, STC 7133 ...
 

Attachments

  • Clipboard01.jpg
    Clipboard01.jpg
    210.5 KB · Views: 172
Archies said:
Hi does anyone know of a decent glue that will stick the little black trim on on the wing, its the trim that runs down the lenght of the car but ive had a new wing on and im not sure what to stick it back on with.


Cheers

Archie
Click to expand...
Most trims like you describe are stuck on using a double sided tape.
Mark the line of the trim using masking tape, with the bottom edge of the masking tape being the top edge of the trim. Fit trim, remove masking tape.
Saves getting it wrong.
 
I used a tube of silicone adhesive about 4 or 5 years ago now and it's still holding strong. I did use a thin stip of sandpaper and just rough up the paint a little.

Any metal/plastic/rubber exterior use compatible adhesive will work.
 
You must log in or register to reply here.

Similar threads

MAF Diver
Disco 2 Rough idle in a V8 D2a — tried MAF, O2, sparks, leads
2
Replies
35
Views
3K
marjon
marjon
Naf623
Disco 2 What fixings to use for the wheel arch liners?
Replies
2
Views
739
jamesDiscoTD5
jamesDiscoTD5
H
Freelander 2 (LR2) window clunking sound when fully opened and closed
Replies
4
Views
329
HDWO55
H
L
Disco 4 (LR4) battery light on
Replies
9
Views
571
Graculus
Graculus
M
A bit has fallen off!!
Replies
11
Views
677
Scooby22
Scooby22
Back
Top