Where did this come from

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

burnsy76

New Member
Posts
9
Was steam cleaning the oil from the engine to find a leak and this fell down from back of engine. Any ideas where it has come from looks like some kind of breather as it's open ended.

Would like for it to go back so if anyone could help that would be great

 
Look's like a section of fuel line.

Yes I will go with that one, looks like a piece of fuel line which has been cut and replaced dropped at the back of the engine unable to find it and you have dislodged it whilst power washing.

Did you find the cause of your oil leak?
 
Yes I will go with that one, looks like a piece of fuel line which has been cut and replaced dropped at the back of the engine unable to find it and you have dislodged it whilst power washing.

Did you find the cause of your oil leak?


This would make sense as it would take more than power wash to dislodge it, no luck with the leak yet, going to degrease it and have a better look this week
 
Found one of the leaks today, which appears to be the vacuum pump and it's spraying out when revving. Will this be the seal between the pump and block or is it more likely to be the seal within the pump??

Also if it is the internal seal, does anyone have the part number for this??

Thanks in advance
 
Takes 2 minutes to remove, might as well whip it off and put some decent silicon gasket sealant on it see if that fixes the problem.
 
Back
Top