Where can I find the heated seat relays?
- Thread starter clivesP38
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 58,170
- Location
- Preston Lancs.
There aren't any, seats are controlled from Hevac via BECM. Fuse 2. 30 amp
strange_days
New Member
- Posts
- 2,411
- Location
- Surrey
They were held at the 2012 Heated Seat Olympics
- Posts
- 58,170
- Location
- Preston Lancs.
Check fuse 2 if that is ok. Check for power to white connectors, L/H C1401 pin 1 Brown/Red. R/H C1403 pin 1 Brown/Blue. If there is power to those. See RAVE heated seat diagrams for further connectors in this circuit for continuity checks.
kevwill
Active Member
- Posts
- 930
- Location
- Sunny Hastings
- Posts
- 58,170
- Location
- Preston Lancs.
kevwill
Active Member
- Posts
- 930
- Location
- Sunny Hastings
There's a good article on p38 heated seat repairs at rangerovers.net.
clivesP38
Active Member
- Posts
- 179
Followed the rangerovers.net instructions on the heated seats and upgraded the thermo switches and mended the breaks in the heated elements. True to form the breaks were in the base of the seat in the crease of the leather. Also had a broken connector to one of the thermo switches. First seat was a bit daunting not having done it before but the instructions were great, the second seat was a piece of p!$$. So what was the outcome.....well the seats never worked so anything would be a bonus, but the seats are hot, so niccccccccccce!
kevwill
Active Member
- Posts
- 930
- Location
- Sunny Hastings
Good news. Good job.
clivesP38
Active Member
- Posts
- 179
Just a quick update.... My drivers seat stopped working, it's been two years since I fixed it! Turned out to be the spade connector on the thermo switch in the seat that I upgraded had come off!! A lot of work stripping down the seat just for that so take a bit of advice...if you have your seat apart to mend a broken wire SOLDER the wire to the thermo switch.
