blackstrat
Well-Known Member
- Posts
- 9,265
- Location
- East Anglia
Ok I'm off to buy a wheelbrace for the Disco soon.. a spider one.. what sizes will it need to have on it for doing both alloy AND steel wheels..?
Wheelbrace socket sizes..
- Thread starter blackstrat
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Thomo1927
Active Member
- Posts
- 361
- Location
- South Walian
I'm sure they are 27mm, I've never seen a spider one with that size though. I got mine from here. Land Rover Defender 27mm Wheel Brace NTC7829R | eBay
blackstrat
Well-Known Member
- Posts
- 9,265
- Location
- East Anglia
They must be available, my local tyre centre uses them.. so are the nuts for alloy wheels the same size as the ones for steel wheels then..?
- Posts
- 10,639
- Location
- Oxfordshire
yeah, i've got some unbranded one from years ago. probably more on the commercial places
http://www.tyre-equipment.co.uk/acatalog/Commercial-4-way-Spin-Wrench-4WL_P.html
discool
Well-Known Member
- Posts
- 13,609
Yes they do, I've recently had new tyres fitted and not an air gun in sight.
After seeing how quick the nuts can be spun off I thought I must get one.
I purchased a Seeley item via eBay, it has the option on one of the arms of fitting your own 1/2 inch socket so I purchased a nice 27mm again from a supplier on eBay, I'll only use it once a year maybe so will last a lifetime
I don't have steels so can't help with that.
blackstrat
Well-Known Member
- Posts
- 9,265
- Location
- East Anglia
Ah yes that would be good.. future proof.. cheers..!Yes they do, I've recently had new tyres fitted and not an air gun in sight.
After seeing how quick the nuts can be spun off I thought I must get one.
I purchased a Seeley item via eBay, it has the option on one of the arms of fitting your own 1/2 inch socket so I purchased a nice 27mm again from a supplier on eBay, I'll only use it once a year maybe so will last a lifetime
blackstrat
Well-Known Member
- Posts
- 9,265
- Location
- East Anglia
I'll probably go with this one for carrying in the car..
LAND ROVER T-BAR TYPE WHEEL BRACE 27mm | eBay
LAND ROVER T-BAR TYPE WHEEL BRACE 27mm | eBay
v8geoff
Well-Known Member
- Posts
- 3,327
- Location
- chippenham,wiltshire
Breaker bar and 27 mm socket
blackstrat
Well-Known Member
- Posts
- 9,265
- Location
- East Anglia
Er.. skim reading were we..?
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
tin covered nuts are often best with a 28mm single hex socket
The V8 man
Well-Known Member
- Posts
- 1,951
- Location
- Redhill Surrey
I also use a 27mm socket with a torque wrench, but the alloy caps on the wheel nuts can swell up and a 27 wont fit them so whatever you go for check that it fits all the wheel nuts before you go anywhere lol
discool
Well-Known Member
- Posts
- 13,609
As I have the use of four cars hopefully this will cover them all if need be, total cost was for me £10.87.
And as I don't have "expanding wheel nuts" 27mm socket fits fine.
Sealey Lug Wrench 4-Way 1/2" Square Drive + 17, 19, 21mm Wheel Lug Wrenches | eBay
Stanley Maxi-Drive 6 Point Long Socket 1/2" Drive-Chrome Vanadium-27mm | eBay
And as I don't have "expanding wheel nuts" 27mm socket fits fine.
Sealey Lug Wrench 4-Way 1/2" Square Drive + 17, 19, 21mm Wheel Lug Wrenches | eBay
Stanley Maxi-Drive 6 Point Long Socket 1/2" Drive-Chrome Vanadium-27mm | eBay
Last edited:
- Posts
- 10,639
- Location
- Oxfordshire
yeah those 1/2 drives on them are a good idea. hots off to the fella that thought of that
