Wheel nuts

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
P

Peco

Active Member
Posts
115
Took Freezie to the garage for some new brakes. Mechanic manages to misplace 3 wheel nuts off the front two wheels along with the locking nuts.... which I only notice due to a weird sound coming from the front wheels when breaking. Bastardo then goes out of business and I'm therefore unable to throttle him..

Anyway, looking for a replacement and found this cheap set on ebay but how on earth do I know if the are the correct size?

4x Locking Wheel Nuts Lockers for Land Rover Freelander | eBay

2003 Freelander Kalahari 1.8 petrol.

Anyone help?
 
Freelaner said:
have you tried asking them?
Click to expand...

Of course. And got this reply:


  • Are these locking wheel bolts/nuts suitable with my wheels and/or vehicle?
    performance3000 : All measurements are given in detail with a helpful diagram in the listing. It is your responsibility to use the information provided to ensure compatibility with your specific vehicle and wheels. We are unable to offer advice on specific wheels due to the huge variances in products available.
 
What you will receive:



One complete Locking Wheel Nut set for:

Make: Land Rover
Model: Freelander

Style: Open
Length: 22mm
Thread Diameter: 12mm
Head Diameter: 23mm +/- 0.5mm
Key Diameter: 26.5mm +/- 0.5mm
Pitch: 1.5mm
Taper: 60 degrees
Click to expand...

Means nothing to me though
 
Hi Peco

yes they are fine. As long as you realise that they are one locking nut per wheel. You will still need to replace the other missing nuts too ;)
 
Depends on whether your wheels are steel or alloy. If the wheels are steel, you could possibly get away with alloy nuts.

The other way round though, and, if after repeatedly removing the wheels, steel nuts could stretch the alloy holes in the wheel. As a rule of thumb, steel for steel, alloy for alloy :)
 
crockett007 said:
Depends on whether your wheels are steel or alloy. If the wheels are steel, you could possibly get away with alloy nuts.

The other way round though, and, if after repeatedly removing the wheels, steel nuts could stretch the alloy holes in the wheel. As a rule of thumb, steel for steel, alloy for alloy :)
Click to expand...

OK so the next stupid question from me is, how do I know if my wheels are steel or alloy? :eek:
 
Steel wheel

nitropaul-albums-my-freelander-picture1487-rear-wheel-clearance.jpg


Alloy wheel

1620inch20alloy20freelander20kjhgfftyu.jpg
 
We got alloys, thank god. Thanks for taking the time to upload those pics. Appreciate it. No thanks you or rep option on the forum?
 
You must log in or register to reply here.

Similar threads

B
FL2 - anyone have 4 wheel bolts spare?
Replies
4
Views
493
Buel10
B
I
Locking Wheel Nuts
Replies
12
Views
709
INZI022
I
C
Newbie Freelander 2 with a vibration and rubbing noise
Replies
7
Views
426
chubbygordito
C
andyfreelandy
Other New Project starting today
Replies
3
Views
664
Alibro
Alibro
O
Disco 2 Looking for part nrs. clips and stay cover front wheel arch
Replies
2
Views
271
discool
discool
Back
Top