Wheel arches

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I just took mine off today!
Fronts - take off 3 screws on wheel arch and then pull off the plastic slowly with your fingers.
Backs - just pull off with fingers.
Use a heat gun to heat up the foam tape that is left adhering to the wings. Rub it off with a cloth - it is messy and slow and you might burn your fingers. Dont use a knife or screwdriver as you will scratch the paint.
Clean glue off with white spirit and T-Cut.

Hope this helps
 
^^ Thats pretty much how I took mine off, few screws and peel them off. Door trims are only glued on too if you have them. Just curious, are you planning on putting aftermarket arches on or just prefer the look without them? I currently have none on and quite like the colour matched look.
 
IMG_2245.jpg


This is the "After" Photo
 
I have problem with door trims ( is it the correct name?) as they have started to deform and the ends are already away from the metal. See photo.
As i understand i can remove them by applying some heat. Is it possible to glue them back after?
 

Attachments

  • 20180928_170301.jpg
    20180928_170301.jpg
    238.1 KB · Views: 105
Yes they just peel off with some pulling. Although mine were pretty warped, I found once removed they warped even more. But I prefer the look without them anyway.
 
Jamiegreen said:
^^ Thats pretty much how I took mine off, few screws and peel them off. Door trims are only glued on too if you have them. Just curious, are you planning on putting aftermarket arches on or just prefer the look without them? I currently have none on and quite like the colour matched look.
Click to expand...
Thinking wide arches should look nice .
 
GWAC said:
I just took mine off today!
Fronts - take off 3 screws on wheel arch and then pull off the plastic slowly with your fingers.
Backs - just pull off with fingers.
Use a heat gun to heat up the foam tape that is left adhering to the wings. Rub it off with a cloth - it is messy and slow and you might burn your fingers. Dont use a knife or screwdriver as you will scratch the paint.
Clean glue off with white spirit and T-Cut.

Hope this helps
Click to expand...
Thankyou for info great help just a bit slow on reply not computer literate not sure how to post or reply people yet .
 
You must log in or register to reply here.

Similar threads

td5jay
Earth point
Replies
9
Views
773
sierrafery
sierrafery
L
Rusted wheel arch repair recommendation
Replies
1
Views
452
brianp38dse
brianp38dse
StuRox
Disco 1 Plastic spare wheel cover - help please
Replies
12
Views
598
resto_d1
R
J
Vibration over 50mph on gradual turn left
Replies
3
Views
232
j1ck
J
D
Disco 3 (LR3) Power Seat Control Removal?
Replies
3
Views
510
gstuart
gstuart
Back
Top