Whats my engine

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Landy-ads

Active Member
Posts
407
Location
Out the front, spanner in hand
Can't find an engine number on my s3 diesel, its not at the front by the water pump as it should be. The log book says 2711560F which should be s2a diesel, but its got the alloy timing case driving the injector pump at the front and the brake vacuum pump for the servo in the block. Looks more like a 2.5 diesel to me, any ideas?
 
OK, here's the piccies. Waddya reckon, 2.25 or 2.5?
 

Attachments

  • engine1.JPG
    engine1.JPG
    166.4 KB · Views: 251
  • engine2.JPG
    engine2.JPG
    164.9 KB · Views: 242
  • engine3.JPG
    engine3.JPG
    156.2 KB · Views: 229
well - as a guess - its a doozil - coz yu seem to have injectors - and i was talkin to Clivees the other day and he sed the 2a has an oil filler on the side, like wot yours has - so I reckon its a 2A doozil. On my 2.5 n/a the air inlet is at the front of the inlet manifold and there is no oil filler on the side.
 
I think it's a 2.5 because the 2.25 had a rotary injection pump fitted where the 2.5 has its vacuum pump.

Also, yours looks like it has a timing belt, and that means 2.5 for sure.

The 2.25 used a chain and sprockets.

CharlesY
 
I think it's a 2.5 because the 2.25 had a rotary injection pump fitted where the 2.5 has its vacuum pump.

Also, yours looks like it has a timing belt, and that means 2.5 for sure.

The 2.25 used a chain and sprockets.

CharlesY


ah see where yer at with this , even though it has a '2.5' pump the rest of it looks 2.25 and as daft says it dint look like his 2.5
 
fook nose but on a 2.25 is on the front rh side of yer block. just below the front manifold stud and if yer tell me what it is it might be in me ' big landy 'book
 
Back
Top