Magicgrotto
Well-Known Member
- Posts
- 2,769
- Location
- doncaster
GET THAT 12 SIDED SPANNER OF & USE A SIX SIDED SOCKET 
Disco 1 What to check next! "updated guys still need help :)"
- Thread starter ceffyn
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
GET THAT 12 SIDED SPANNER OF & USE A SIX SIDED SOCKET ceffyn
Active Member
- Posts
- 418
- Location
- Aberdare - South Wales
haha i will use a six sided socket when i go back out might even treat it to an actual 9/16. but what im trying to work out is the deal with the stud coming out not the nut coming off! the 4 im on about are clearly stud and nut lol
also for the record was open end spanner my ratchet end wouldnt fit haha
also for the record was open end spanner
my ratchet end wouldnt fit haha
Magicgrotto
Well-Known Member
- Posts
- 2,769
- Location
- doncaster
The 1 in the picy is a RING spanner
ceffyn
Active Member
- Posts
- 418
- Location
- Aberdare - South Wales
not my picy was to show what studs/nuts i was on about. so yeah whats the deal with them studs if they come out haha
was to show what studs/nuts i was on about. so yeah whats the deal with them studs if they come out haha
Magicgrotto
Well-Known Member
- Posts
- 2,769
- Location
- doncaster
GET some 1/4 drive 6 sided sockets ! LONG REACH !!ceffyn
Active Member
- Posts
- 418
- Location
- Aberdare - South Wales
that still dont answer the whole studs coming out thing haha
Magicgrotto
Well-Known Member
- Posts
- 2,769
- Location
- doncaster
ceffyn
Active Member
- Posts
- 418
- Location
- Aberdare - South Wales
1/4 inch extensions are not a problem or the adapters if i wish to use the bigger bars further down the line and if i really want there is always the impact gun lol. im not concerned about getting them out im concerned that i have no idea if taking the studs out instead of the nuts off will be an issue or are they just like most the studs on the block if they come out clean them remove the nut and put them back (or be lazy and put them back in the one they came from with the nut on like a bolt lol)
Magicgrotto
Well-Known Member
- Posts
- 2,769
- Location
- doncaster
ceffyn IF they are studs I will stand on mi head at the top of a Welsh Hill & Pi*s Paraffin !
ceffyn
Active Member
- Posts
- 418
- Location
- Aberdare - South Wales
you sir are a legend went back out to remove the one i thought was a damn stud can see now what you mean its a bolt from the inside with something to retain it lmao i was tuning the "play" it had and thinking it was coming out.
gonna stay silent now while i find my 6 side because this time the tool that was an issue was me not a metal object in my tool box haha
Magicgrotto
Well-Known Member
- Posts
- 2,769
- Location
- doncaster
STICK WI ME BOY & YU WONT GO WRONG !!!!!
Magicgrotto
Well-Known Member
- Posts
- 2,769
- Location
- doncaster
O & While your under there get your PRY BAR & Check the A FRAME BALL JOINT !
ceffyn
Active Member
- Posts
- 418
- Location
- Aberdare - South Wales
after much fighting got the damn thing off one of the nuts is shredded (anyone know what size and where i can get one). had to get it with a spanner in the end.
took it for test drive and the clunk/problem is very much still there front prop not being taken off yet though cause as usual its raining again here
took it for test drive and the clunk/problem is very much still there front prop not being taken off yet though cause as usual its raining again here
Magicgrotto
Well-Known Member
- Posts
- 2,769
- Location
- doncaster
Am i SPEAKIN RUSHEN ?? Have you given that A frame ball joint a good WIIIIIIGLE ??
ceffyn
Active Member
- Posts
- 418
- Location
- Aberdare - South Wales
yeah i give that a shove, wiggle and shake it seems ok but getting dark by time i got to it so will check again when i get under to put the prop back on (wont be tonight its pi$$ing down yet again)
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Not sure about the language, but it does look like your typing finger has tourettes.....
Cheers
ceffyn
Active Member
- Posts
- 418
- Location
- Aberdare - South Wales
my fingers suffer with almost as bad a case of tourettes as my brain does. unfortunately i haven't mastered the filter between my brain and my mouth/fingersNot sure about the language, but it does look like your typing finger has tourettes.....
Cheers
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
The nut size and part number can be found here. You may need to search for the part numbers. If you replace the bolts, Make sure you use the correct ones.
http://www.allbrit.de/UNI.cfm?PAGE=805607&SPRACHE=EN
Or you can go online and buy a set they are cheap enough.
Cheers
ceffyn
Active Member
- Posts
- 418
- Location
- Aberdare - South Wales
thank you looks like im off to bearmach for a new set might as well do them all as its only a couple of quid.
ceffyn
Active Member
- Posts
- 418
- Location
- Aberdare - South Wales
ok so the obvious i have to remove the drum to get in and change the bolts but how much of a pain in the ass is changing them actually going to be!
fighting a never ending battle and losing at the moment so might as well be prepared for the worse case.
fighting a never ending battle and losing at the moment so might as well be prepared for the worse case.
