What Spark Plugs for V8i 3.9 Gas conv?

Disco Cane · Dec 8, 2009

Hi All,
I am giving the Disco a service and I wondered if there were special plugs for Gas Conversion Engines? and if there are what would they be?

Thanks in Advance.
D.C.

discool · Dec 9, 2009

There's a few threads on this, so do a seaech, here's one to start u off. http://www.landyzone.co.uk/lz/f8/best-place-buy-my-spark-plugs-online-83276.html

Disco Cane · Dec 9, 2009

discool said:
There's a few threads on this, so do a seaech, here's one to start u off. http://www.landyzone.co.uk/lz/f8/best-place-buy-my-spark-plugs-online-83276.html

Hi Discool,
I Had a look at the thread that you pointed me at,...I went on the NGK site to see what they suggest after clicking the Disclaimer I was told a BPR6E,...EBay are cheap enough would have to rind up about postage for 8x of them,...Up to now it,s great ....BUT! will these plugs be suitable for a Gas Conversion?,...There is No mention of a Gas Conversion on NGK,s website............

So! Back to my Original Question "What Spark Plugs for V8i 3.9 Gas conv?"
Many Thanks for your Patience.
D.C.

discool · Dec 9, 2009

FE65PRS-GAS Spark Plug Listing

mrnice · Dec 9, 2009

I have a 96 disco 1 V8 and i had NGK BPR6E in mine when i serviced it recently, i replaced them with the same, take 1 out and see what your already using. Go to the the RPI website (google RPI V8) and get the number off there, give them a bell and they will discuss what plugs will best suit you (different gap, heat ranges etc) very helpful indeed and a lot more to it than i had assumed, also have a chat with your local LPG mech and see what he would suggest, you can also buy magnacor blue HT leads specially for an LPG V8, bit pricey mind....maybe santa will get me some.

Disco Cane · Dec 9, 2009

Many Thanks .....

I will try that later on today....Rushing at Mo......Funeral of my Shipmate so Am Late..

Thanks once again.
D.C.

eightinavee · Dec 9, 2009

Oem leads and NGK BPR6ES plugs are all you need,fine for LPG too.Dont bother with RPI,they will try to sell you a load of gear you dont need.

nathan5346 · Dec 9, 2009

eightinavee said:
Oem leads and NGK BPR6ES plugs are all you need,fine for LPG too.Dont bother with RPI,they will try to sell you a load of gear you dont need.

i called and spoke to em fer some advice about coil packs and the guy on the was shuvin info down me neck before i asked anything... magnecore leads buy from us...**** me he wuz too keen.. cudnt get a word in edgeways

listerdiesel · Dec 9, 2009

OUR V8 has got Champion double-insulated leads and Champion OE138 plugs.

The leads were on it when we bought it, the plugs we got from the 'States, $5.60 each plus postage to our friends in Arizona, who brought them over for us.

Put the plugs in with a smear of Copaslip on the threads.

Magnecor are nice but a whole lot more than you need for a road car, and very pricey!

Peter

Disco Cane · Dec 9, 2009

Many Thanks..
Lister Diesel
Nathan
and 8 in a vee

Pleased to hear that the Ord plugs will suffice so will buy those ones..

Thanks Again to you all.
D.C.

What Spark Plugs for V8i 3.9 Gas conv?

Disco Cane

New Member

discool

Well-Known Member

Disco Cane

New Member

discool

Well-Known Member

mrnice

Loading.....

Disco Cane

New Member

eightinavee

Well-Known Member

nathan5346

Well-Known Member

listerdiesel

Well-Known Member

Disco Cane

New Member

Similar threads