MonkeyHarris
New Member
- Posts
- 7
Help needed to identify model and what year this door lock is from, as I need to replace the barrels. I see 3 problems at present. What lock? What barrels do I need? And how do I change them when I don't have a key? 
What lock do I need?
- Thread starter MonkeyHarris
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 7,332
- Location
- Under my landy
what are they from? I'm confused by the bar going off the lock...
I have some lock barrels for non-anti-burst locks in the shed not doing anything, however, i'm fairly sure you'll need a key to remove the old barrels.
I have some lock barrels for non-anti-burst locks in the shed not doing anything, however, i'm fairly sure you'll need a key to remove the old barrels.
dominicbeesley
Well-Known Member
- Posts
- 1,701
- Location
- Hebden Bridge, West Yorkshire
Are they off a defender?
MonkeyHarris
New Member
- Posts
- 7
Thanks for coming chaps.
I am told the doors are defender and the bar connects to the front internal door handle. The problem I have is the only defender locks I seem to be able to find refer to push button handles rather than external lift. Anti burst wont fit as defender doors have drop windows. Any thoughts?
I am told the doors are defender and the bar connects to the front internal door handle. The problem I have is the only defender locks I seem to be able to find refer to push button handles rather than external lift. Anti burst wont fit as defender doors have drop windows. Any thoughts?
MonkeyHarris
New Member
- Posts
- 7
Alternatively. Do series 3 doors fit a 2a which is what I have?
- Posts
- 7,332
- Location
- Under my landy
Alternatively. Do series 3 doors fit a 2a which is what I have?
Yes Series 3 and Series 2a doors are interchangable, as mentioned the only difference is the hinges and also the window mechanism lock (very minor point)
You can fit defender anti-burst locks to a series door (see the How To section for my guide) which is reasonably straight forward and adds a bit more security (well, at least the doors don't fly open of their own accord anymore
)
What year defender are they off as just changed the lock barrel on a 1991 defender and they where standard anti burst lock barrels fitted into plastic insert in the handle. Rear was anti burst type that also fits series and did not look like those pics ie the lock barrel protruded and to change lock part you had to push pin in hole in the side whilst key in turned to 11am position.
PS cannot be certain doors on this defender are original
PS cannot be certain doors on this defender are original
