What have you done to your Landie today.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
went to lro show last weekend was the kids and dog's first camping trip and I was impressed with their behaviour. had to lengthen the legs on my roof rack as it was for a defender truck cab so was too short to clear the disco roof.
I'm now using my cav for comuting to try to save some money on fuel 36mpg beats 26-28mpg so that should be a few quid saved for more landy bits :D
Im currently making 2" lift blocks by cutting 2" box section to be bolted between the axle and spring seats. is this a bad idea is there any problems I might be overlooking?
 
huffhuff said:
It's actually bolted to the metal plate (the one with the holes in), not the grill. I just cut a hole for it to stick through. I can take some closer pics if you like
Click to expand...
ah fair play I want front and rear anderson connectors for jump leads as i always have trouble with the croc clips and my battery and always seem to be facing the wrong way to jump someone
 
Animal88 said:
ah fair play I want front and rear anderson connectors for jump leads as i always have trouble with the croc clips and my battery and always seem to be facing the wrong way to jump someone
Click to expand...

Ha, I know what you mean.

I put my Anderson in mainly because I changed my seats and it's an arse to remove it every time. There are plenty of places to mount it up front and at the back. I'm just fussy.

The metal bit I was talking about is the bit in this picture, below the actual grill. It has a lip at the top so can be mounted horizontal

land-rover-defender-stainless-steel-front-grill-black-da2356b-9b4.jpg
 
In the last week to get my sisters little 90 ready for it's MOT I have...

Fitted two new angel eye headlights
Replaced rear square fog and reverse lights with more modern round style
Fitted new side repeater
Fitted new sidelights and indicators
Painted and fitted new front wing
Painted and fitted new front bumper
Fitted front license plate
Painted and fitted new truck cab roof (converted from van)
Painted and fitted tailgate
Fitted two new rear brake calipers and pads
Changed nearside rear wheel bearing and seals
Made new front caliper brake pipes
Fitted new stainless steel flexi brake pipes
Removed middle seat and replaced with cubby box
Replaced rear propshaft
Fitted new rear bumperettes
Adjusted gear lever bias springs and fitted new rubber boot
Replaced steering box with reconditioned unit
Fitted discovery drop arm and disco style track bar and ball joints
Painted and fitted new bonnet
Fitted checker plate to bonnet, wings and rear quarter
Fitted new aluminium vents
Changed all fluids

Just about to go outside now and bleed the brakes...
 
Last edited:
nesponge said:
In the last week to get my sisters little 90 ready for it's MOT I have...

Fitted two new angel eye headlights
Replaced rear square fog and reverse lights with more modern round style
Fitted new side repeater
Fitted new sidelights and indicators
Painted and fitted new front wing
Painted and fitted new front bumper
Fitted front license plate
Painted and fitted new truck cab roof (converted from van)
Painted and fitted tailgate
Fitted two new rear brake calipers and pads
Changed nearside rear wheel bearing and seals
Made new front caliper brake pipes
Fitted new stainless steel flexi brake pipes
Removed middle seat and replaced with cubby box
Replaced rear propshaft
Fitted new rear bumperettes
Adjusted gear lever bias springs and fitted new rubber boot
Replaced steering box with reconditioned unit
Fitted discovery drop arm and disco style track bar and ball joints
Painted and fitted new bonnet
Fitted checker plate to bonnet, wings and rear quarter
Fitted new aluminium vents
Changed all fluids

Just about to go outside now and bleed the brakes...
Click to expand...
You have been busy hope it passes now.
 
took all afternoon welding upside down, 4 small patches on underneath of chassis.

there's more weld on me and the floor, than in the chassis !!!

still got tons to do ........ :(
 
You guys spurred me on and I brought these
http://www.ebay.co.uk/itm/like/12V-TWIN-DUAL-TONE-LOUD-AIR-HORN-CAR-VAN-LORRY-HORNS-COMPRESSOR-PIPE-RELAY-NEW/350906181646?hlpht=true&ops=true&viphx=1&_trksid=p5197.c100068.m2280&_trkparms=ao=1&asc=20140211125758&meid=6f113eb0deb8482c8ba58cea668d1966&pid=100068&clkid=143017016355745952&_qi=RTM2108002
Been thinking about it for a while and the last P&P I did no one could hear my horn, had to send the winch bitch to get help a couple of times.

Well part of my Paddocks order arrived today, an air filter, the parts that I really need didn't (the exhaust system).
Not sure if Fedex fecked up as invoice states Number of parcels 2 and the Fedex sticker has item 1 of 2, but only one box delivered.
 
Last edited:
Just been sorting out the carpets for the front footwells. Years of wet/dry cycles had turned the foam backing hard and it was coming off in chunks. Removed all the affected bits and glued in replacement backing made from an old camping roll mat. Looks much better now as the carpets hold their shape in the footwell. Slowly becoming civilised :)
 
Fitted the air horns today, there 135db and LOUD, I hate to think what the 150db ones are like.

Exhaust still hasn't arrived :mad:
 
Changed the starter motor. Them air horns look the part, do you just take a feed from the std horn?
 
They come with a relay as they'll draw more current than standard horns, so you'll need some wire, connectors and a fuse/fuse holder.
I made up a small bracket to mount the horns on and the compressor bolted in where one of the old horns was.
 
Over a few weeks I put a new engine and transfer box in,new radius arm bushes and new lights on the back. Now got another years not!

Put a discovery transfer box in so it goes slightly faster. But when I am on full lock the back wheels seem to lock up in the diretion I'm turning.

I had an almighty bang coming out of tesco,! Then I nasty whine so I knocked the box back into neutral and back into high range and it stopped. It's almost as if its stuck on lock. Anyone heard of this before?
 
tcuted the whole truck and got rid of most of the laning scratches. was planning on some wiring aswell but the cleaning of my cav and disco took all day
 
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
536
BEASTIE 90
B
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
626
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
906
Knappster
Knappster
Mooky
Replacing thermostat
Replies
14
Views
551
Mooky
Mooky
I
Re-coding of ABS Module after repacement
Replies
10
Views
987
invisible999
I
Back
Top