What have you done to your Landie today.
- Thread starter madfrank
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
honolulujoe
Well-Known Member
- Posts
- 6,137
- Location
- richmond surrey
hung the doors properly on the s3, put the heater blower back in, found one of the windscreen to bulkhead hinge bolts and put it on 
Zigster
Active Member
- Posts
- 138
- Location
- Chesterfield, Derbyshire
Treated my self to a new DAB stereo and spent the afternoon/evening looking like I'd been self harming thanks to threading the DAB antenna and handsfree mic wires under the dash etc
Went billing yesterday got a good few bits and now have a complete nose back on my D1 with noo grill and light surrounds and a noo winch bumper. Got a replacement dash clock and drivers wing mirror as mine wobbles about so I have no idea what's next to me. Noo central locking box and fob so I will hopefully have my remote locking back. So plenty of things to tinker with.
Attachments
honolulujoe
Well-Known Member
- Posts
- 6,137
- Location
- richmond surrey
bodged the s1 exhaust with a bit of wire coat hanger as a bracket and some chemical metal to hold the two bits together after the back bit fell off
Last edited:
Tonym3
Active Member
- Posts
- 181
- Location
- Brentwood, Essex
Thanks to fellow Landyzone members I received my new side panels with windows and arranged to collect my new rear seats, just waiting on the seat base then it will be a ha trick of successful Landyzone puchases!
Much better than EBay !!
Much better than EBay !!
- Posts
- 7,877
- Location
- East Midlands
I had a new pressure washer delivered and have spend a happy hour or so hosing the underside of my Defender. It's much better than my old one and has a reel to wind up the pressure hose as well as accessories like an underchassis nozzle and an underchassis lance. So I've got a lot of the congealed oil and road dirt off the underside of the engine and gearbox, which was very satisfying.
Planning a big trip in a couple of weeks, just ordered these.
sp00k
Well-Known Member
- Posts
- 1,530
- Location
- Washington, County Durham, UK
Changed the brake fluid.
lcbandit
Well-Known Member
- Posts
- 1,548
- Location
- west yorks
just driven her to work, half the ****s on the road must have their eyes painted on!! tried pulling off a slip n no fooker would let me in, nearly side swiped 2! lol I now have an issue with my window though, cos I drove like a proper landy driver with the window down, it won't wind up to the top! job for me in my lunch time
doriz
Well-Known Member
- Posts
- 17,312
Sorted a raft of electrical gremlins and then removed a rear row seat to fix the retaining catches. Just need to re spray the frames and get some staples for upholstery gun.
Chrisw8
Well-Known Member
- Posts
- 1,980
- Location
- Top of the Hill
Cut more bits off it
- Posts
- 44,863
- Location
- Hornchurch
Drove accross Kent, Essex and Suffolk and took in some fords whilst doing it.
biggeeeee
Retired - Living the dream
- Posts
- 11,090
- Location
- Lanarkshire or Argyll
MOT time on Tuesday so my list this week
Front office hub replaced, although nothing showing on dash or Nanocom the wheel had loads of play in it. I also replaced the track bar and track rod ends as they had seen better days.
Anti roll bar bushes replaced as the old ones were showing signs of age.
Had a bit of rough running recently and replaced the injector. Harness and cleaned out the red plug. Also replaced the MAF for good measure.
All had never been replaced before so not bad to get to 160+ thousand miles.
Had a problem with the rest door window that kept coming out its channel. Replaced the channel with a new one and all good.
So tomorrow a clean and tidy and off for a service and MOT
Front office hub replaced, although nothing showing on dash or Nanocom the wheel had loads of play in it. I also replaced the track bar and track rod ends as they had seen better days.
Anti roll bar bushes replaced as the old ones were showing signs of age.
Had a bit of rough running recently and replaced the injector. Harness and cleaned out the red plug. Also replaced the MAF for good measure.
All had never been replaced before so not bad to get to 160+ thousand miles.
Had a problem with the rest door window that kept coming out its channel. Replaced the channel with a new one and all good.
So tomorrow a clean and tidy and off for a service and MOT
