Not at all ... I just don't want another bill from the council for re-asphalting the area of the road which melted due to oil penetration!
What have you done to your Landie today.
- Thread starter madfrank
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
muckmuck
Active Member
- Posts
- 798
- Location
- chatteris cambridgeshire
- Posts
- 6,168
- Location
- North Manchester
Changed the bottom seal on my pas box. Only took 6 hours
woody13
Active Member
- Posts
- 261
- Location
- Manchester
Fitted a wide angle front prop after damaging the old one at Parkwood last month.
robbh
Crazier than a box of frogs on acid
- Posts
- 1,755
- Location
- Edge of the New Forest. Wiltshire
Not a lot. Just drove on a whim around my local lanes enjoying the beautiful weather today.
aaronmorris
Head's a shed
- Posts
- 6,369
- Location
- Doncaster
Not a lot. Just drove on a whim around my local lanes enjoying the beautiful weather today.
Nice
Seems most people had a good day today. Guess that's it for 2015 then :monitor_punch:
cornish rattler
Well-Known Member
- Posts
- 6,432
- Location
- Manc chester
Replaced my noisy power steer pump today aswell as replace the alternator and power steer belts aswell took ages to bleed though haynes bible was useless but got there in the end
FlyingPete
Well-Known Member
- Posts
- 1,305
- Location
- Coventry
Bled the clutch fluid out for new. Also tinkered a bit with the trailer socket to trace an earth fault
- Posts
- 83,282
- Location
- Embasinga stocæ
Not a lot. Just drove on a whim around my local lanes enjoying the beautiful weather today.
\dont let Rob see them tyres - he will have coronary
elliot0850
Active Member
- Posts
- 184
- Location
- leicester
FINISHED the main part of the roll cage.
Well I say finished, the main part is all tacked together. Still need to do the internal brace behind the front seats, front wings, incorporate some defender headlights in the front of the cage to replace the 2 candles that I’ve got at the mo. fully weld it, paint and wire all the lights.
Thought I was nearly there in till I listed all the jobs
Well I say finished, the main part is all tacked together. Still need to do the internal brace behind the front seats, front wings, incorporate some defender headlights in the front of the cage to replace the 2 candles that I’ve got at the mo. fully weld it, paint and wire all the lights.
Thought I was nearly there in till I listed all the jobs
Last edited:
danny6801
Well-Known Member
- Posts
- 1,665
- Location
- North Wales
I had something similar in my 300tdi discovery a while back, really good to have a built in sat nav, and probably quite easy to plumb in a reversing camera too?
I believe you can set the resting angle of the screen.
danny6801
Well-Known Member
- Posts
- 1,665
- Location
- North Wales
Yeah you can move the angle of the screen forwards and backwards will be handy not having to have the sat nav on the windows plus I bought it cheap so all good really.
been to yarwell today testing out all my toys I've fitted since the last time I was there. really impressed with where it can go now.
did get it stuck coming out the trees though so it''s not unstoppable yet but it's getting there
did get it stuck coming out the trees though so it''s not unstoppable yet but it's getting there
Attachments
cowasaki
Well-Known Member
- Posts
- 1,517
- Location
- North West England
Fitted 2 x HD Hardy Spicer UJs to the rear prop on the Defender........
Smoooooooth now.
Smoooooooth now.
Bobsticle
De Villes Advocaat
- Posts
- 27,632
- Location
- Manchester
Thanks to LZ, I managed to download the last MOT fail from tinterweb.
Its quite a list but I have fettled most of it already.
Didnt pick up on a wheel bearing though so thats what I checking today along with the brakes.
Its quite a list but I have fettled most of it already.
Didnt pick up on a wheel bearing though so thats what I checking today along with the brakes.
Service including oil change, oil, air crankcase and turbo filter also pollen filter (looked like never changed) and egr bypass. Also had to sort rear window as it wouldn't recalibrate as couldn't go all the way down as jamming on a cable inside the rear door that had came loose
simonm15
Member
- Posts
- 89
- Location
- West Berkshire
Taken it to the garage for the second time in 3 weeks
