What have you done to your Landie today.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
blue beasty said:
Dunno, might look a bit silly on a 90........Looks awesome on a Series :)


Can't see fook all in them mind..........
Click to expand...

We talking the little round ones here or the oblong ones ??

Got series one on the offside door hinge, thats the one I broke:(
 
Unbolted the little recovery hitch from the rear xmember
stkldy029_zps7073580f.jpg


And put the towbar on instead, ready to tow trailer tomorrow!

stk001_zps522034ec.jpg
 
We're to start :) I dropped the back of my little 90 pick up to pick a hutch up for my lass. Got back home just pulling on the drive to see a oil poring out on the drive. New job tomorrow :-(
Kevin
But it dose look good with out her top on lol
 
Had 15 mins to find reason for knocking/juddering coming from wheels and fix before picking up kids from school... Passenger side wheel bearing hopelessly loose... :-/ tightened, put tools away, got to school on time!! But knocking juddering noise still there!! :-/ also noticed leaf spring u-bolt nuts are half way down the thread on drivers side.. But have stick there, and are immovable!!! :-/ ordered some more bolts and nuts, will cut old one off, and hope that sorts the knocking/juddering out.... ?
 
noticed a puddle under the front of the 110 last night thought it was the pas box leaking (seemed to be oily, with this cold could'nt use me sense of smell to tell what it was) the PSF was about half way down the res so assumed i had leaky PAS box as its always had a bit of oil about it :(.
took the rocker sound proofing off the top to get a better look at it, turned out to be the coolant pipe from the fuel cooler to egr thingy above the water pump, clamp(jubilee clip type) had cut into the hose and was weeping through there. got a new jubilee clip and cut about an inch off the pipe and refitted, needs a new pipe but that will do till the new silicone hose arrives from fleabay.:rolleyes:
 
Removed knackered old drag link and refitted new one, should have taken no time but I was silly and faffed about so it took 3 hours.
Should have got the grinder out first.
Then was told that none of my lights were working...
 
Fell out wea it whilst changing the oil cooler pipes. Shouted at it and got angry:mad:.......turns out me being as numptie i left one of the o-rings in the filter housing end and hence why it wouldn,t go back together:rolleyes:.

theres a leson in there somewhere and i think its me being a tube!:D
 
Decided to paint it dark blue, a bit at a time. I'll start by refurbing the nearside hub and painting it.
When the weather gets warmer that is
 
Cleaned the ECU red plug of copius amounts of oil and ordered a new injector harness to hopefully prevent this occurring again. Doing this instantly cured the M and S error I had from yesterday. Fitted aftermarket non-fancy side runners to aid egress, trouble free aside from failure to remove the screws for the original front mudguards due to corrosion. Had to cut them off with a knife.

Took the truck to nearest tyre place, who had ordered me in a set of 4 General Grabber AT's for them to fit. Tracking also done.

Drove home mighty impressed with the difference in the AT's from the Wranglers that were on there. No tramlining at all and steering felt much more precise.

Tomorrow, is the start of a complete service, just awaiting some bits and pieces to arrive from mail order.

Came to realisation I have spent almost £1k since picking up the D2 last Saturday and it is still middle of the week :-(
 
Renewing rear wiper blade on my Discovery 2. Pain in the arse having to remove the spare wheel. Then went round all the car shops to find that they don't stock them!!!! Thankfully I found a land Rover/Audi service centre stuck in the middle of nowhere who had one. And he didn't charge the earth. At £2 cheapest wiper I have ever bought!!!!
 
Grahame of the shires said:
Renewing rear wiper blade on my Discovery 2. Pain in the arse having to remove the spare wheel. Then went round all the car shops to find that they don't stock them!!!! Thankfully I found a land Rover/Audi service centre stuck in the middle of nowhere who had one. And he didn't charge the earth. At £2 cheapest wiper I have ever bought!!!!
Click to expand...

If I 'members correctly, yu. Don't need to remove spare wheel. Just park it vertically & replace blade.
 
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
536
BEASTIE 90
B
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
631
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
910
Knappster
Knappster
Mooky
Replacing thermostat
Replies
14
Views
558
Mooky
Mooky
I
Re-coding of ABS Module after repacement
Replies
10
Views
988
invisible999
I
Back
Top