What have you done to your Landie today.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Replaced me brake light holder on the 110 as the bulb kept popping out. Put on new Wipac one.....bag of **** the holder wasn't seating correctly so got another out of stock and put that on. Works fine now.Even replaced the other lens so they match....
 
Originally Posted by Bromsgrove Defender
oooo what else ya got?

series II seat box tool box trayee thingy? No Bugger!

wing mirrors? No Double Bugger!

Dash lighty's? Only series 1 ones Triple Bugger!


light switchy thing? If you mean the black un the key goes in then no No the one that is just the grey un running light thingy

wheels? I have a set of wheels. Not series though but silver mods with at's on:D:D:D Noooooooo :doh:

;)

:cool: :D :D
 
Wahey .. FINALLY found the rattle when setting off and occasionally when slowing down. Been progressively getting worse for the last couple of months. Sounded originally like it was a pulley, then exhaust at the front, then exhaust at the back, then no idea 'cos it didn't seem to come from the same place every time .. really feckin' baffling.

So this evening I got the Disco on ramps on only one side so it's leaning over, ran the engine and listened .. definitely exhaust ... engine off .. mounting bracket for centre bit is bolt-on and I'd missed it, I always thought the mounts were welded on! So a quick tighten up with a 13mm spanner and Roberts shagging the auntie again .. ;)

I is happy now, and the wife happier 'cos she thought the world was gonna end (again) and cost a fortune! ;)

I also cut up a DVD cover and temporarily fitted (Electrical tape) them to the light-bar lights to see if they work at stopping the light getting into the cabin.
 
Wahey .. FINALLY found the rattle when setting off and occasionally when slowing down. Been progressively getting worse for the last couple of months. Sounded originally like it was a pulley, then exhaust at the front, then exhaust at the back, then no idea 'cos it didn't seem to come from the same place every time .. really feckin' baffling.

So this evening I got the Disco on ramps on only one side so it's leaning over, ran the engine and listened .. definitely exhaust ... engine off .. mounting bracket for centre bit is bolt-on and I'd missed it, I always thought the mounts were welded on! So a quick tighten up with a 13mm spanner and Roberts shagging the auntie again .. ;)

I is happy now, and the wife happier 'cos she thought the world was gonna end (again) and cost a fortune! ;)


I also cut up a DVD cover and temporarily fitted (Electrical tape) them to the light-bar lights to see if they work at stopping the light getting into the cabin.

ready for mud then :p
 
Always .. ;)

Well, so long as the AT's (or someone's winch) get me through .. :)
 
Back
Top