What have you done to your Landie today.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
fitted the new nozel tip in the mig , then finished welding the new tow plate and welded a patch on a hole on the Xmember/chassis join.
just got a couple of small patches left to do should have it all rapped up tomorrow :rolleyes:
 
Had myself a productive day. Managed to make a dash with a starter button and some warning lights!!





Also made a start on a battery mount to hold my battery box as low in the rear tub as possible to keep the weight as low as poss.

Run out of metal to stick together so I left it half welded up awaiting some 3 x 50 mm angle to complete.




Started on mounting the cut out switch which sounds alot easier than it is! It must be located somwhere easy to reach by the driver when held back in your harnesses, when inverted on its side or any other interesting position. It must be a nice run for the Main battery and ign cables. It must be situated so I can run 2 bowden cables from either side of the motor to comply with regs incase for any reason the driver cannot cut the engine a marshall or official can get to either of the sides to kill the engine and electrics.

So proigress was made today which is good.
 
Drove it home from work with the rear sliding windows open, make the most of this great weather :cool:
 
took the front propshaft off, well I say took, it was more of a case of the rear half fell off as I was driving home from work, so I had to take the rest of it off, now got to buy and fit another one before this weekend as I'm supposed to be going to Wales on Thurs :(
 
zan79 said:
took the front propshaft off, well I say took, it was more of a case of the rear half fell off as I was driving home from work, so I had to take the rest of it off, now got to buy and fit another one before this weekend as I'm supposed to be going to Wales on Thurs :(
Click to expand...

If you'd driven around a bit more the other half would've fell orf anorl :p
 
sorted Steeing pump:D went for a test drive, just got off my drive only hear a load bang and then work out my diff is f#ck#D in the back end!!!!!( good news Pump is A1)
K`in land rovers, But thats the disco for you
 
got home from work and drained oil, and :):)new filter and sump gasket etc. Im getting there slowly one job at a time ,just rear diff oil left then new brakes for the old girl .
 
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
465
BEASTIE 90
B
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
559
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
816
Knappster
Knappster
I
Re-coding of ABS Module after repacement
Replies
10
Views
892
invisible999
I
C
Freelander 1 crank no start
Replies
1
Views
1K
niccage
N
Back
Top