What have you done to your Landie today.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Found more massive ****ing holes and took out some more **** wet through carpets. ****ed off, did all the arches in the back, dried the carpet out put it back and it's **** wet through again. The mother ****er is almost rot free on the outside it's just rotting its way from the inside out, where all the water is collecting in places and eating it's way through the seams etc.
 
Found more massive ****ing holes and took out some more **** wet through carpets. ****ed off, did all the arches in the back, dried the carpet out put it back and it's **** wet through again. The mother ****er is almost rot free on the outside it's just rotting its way from the inside out, where all the water is collecting in places and eating it's way through the seams etc.

rip the fooking carpet out!
 
I took one of mine for an mot and it failed on the drop arm ball joint and sure enough it was knackered. Not the easiest of jobs as had to air file the top cup to collapse it but better than taking the drop arm off though. Re-test (partial) and tester says" good oh, i bet you can tell the difference" This man has no experience of old landis obviously !
 
Welded some extra re-enforcement to my front dumb iron and painted it up. Was going to look at doing new door seals anorl but ran out of time and it's not like it's gonna rain anytime soon :eek:......I did sort the drivers door window lock though :)
 
Re-trimmed both front seats and fitted some heater pads, so no more freezing my arse off this winter :D. getting the cable up from the fusebox to the new switches next to the ciggy lighter was a PITA
 
Re-trimmed both front seats and fitted some heater pads, so no more freezing my arse off this winter :D. getting the cable up from the fusebox to the new switches next to the ciggy lighter was a PITA

Looking to do that when I fit my new recaros. ( just too knackered to do much these days) disco or fender? I was going to go straight from battery ( I have an independent fuse box for ancillaries in the battery box) and put the switches in the face if the cubby box when I fit it.
 
Got all the rust off the roll cage, hammerited and put back together.

Took one set of bench seats out to make way for some bodged speakers

Fixed my rear wipers again. For good this time.
 
Back
Top