What have you done to your Landie today.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I pressure washed my landy today then swiftly cracked one off on the bunnet.
Best day off i have had in ages.

Tomorrow I think I will sit on the gear stick and possibly a quick trip to the local dogging spot.
 
Put the new clutch kit and release arm and second hand pivot point in and threw the gearbox back on. Piccies of pivot points, notice wear on bearing slide tube inorl. And wear on slipper pad and pin on the old release fork.

P7160091.jpg

P7160092.jpg
 
Took the lights off the lightbar and put 'em on the bumper .. doesn't look as 'cool' but they work well enough and won't shine into the cab there. Ordered some square lights for the roof, see if they work!
 
I've had to leave the old girl on the farm today :(

Clutch had been bad the last few days and then when i went to go home today it wouldnt go into gear. had abit of a poke about, checked fluid, tried bleeding it, nowt :mad: Looks like the master cylinder is gone
 
Bought replacement headlamp bulb, haven't put it in yet. Rang the parts place had two options...a peasant bulb for a fiver or a gold-plated latinum hydrogen powered halogen fired thingy for £95 quid! Are you serious?!? :eek:
 
Put a volt meter to the rear wiper as that has stopped working. :(

Volts = OK

Oh bugger another strip down to see what is up.

Spare wheel off, wiper arm off all that stuff.

.. this is holiday full day number 11 too
 
Ok so not today but just uploaded picture's of the build.
From this
Thebuild002.jpg


Insulated
Thebuild020.jpg


Head lining removed
Thebuild012.jpg


To relined
Thebuild150.jpg


And finished
Thebuild149.jpg


Many hours spent on it just got to try it out :D
 
Ok so not today but just uploaded picture's of the build.
From this
Thebuild002.jpg


Insulated
Thebuild020.jpg


Head lining removed
Thebuild012.jpg


To relined
Thebuild150.jpg


And finished
Thebuild149.jpg


Many hours spent on it just got to try it out :D

Nice work is the plan to make the back into fold away beds ?

i know in the army we used to use some stretchers with the handles cut off in the back and suspended them from the internal roll cage with chain for when we was away
 
Nice work is the plan to make the back into fold away beds ?

i know in the army we used to use some stretchers with the handles cut off in the back and suspended them from the internal roll cage with chain for when we was away

All measured up for two folding matresses. Still got to make two drawers for it and some other bits but need to sort the starter motor first so its back out there with the spanners
 
Back
Top