What have you done to your Landie today.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
nick2303 said:
finished welding!!! woo hoo...


also painted all boot floor and refitted the trim in the boot and the seat belts and the carpet...

left out the thick spongy stuff that was under the carpet as i left it in garden and it got wet through as it p'd it down!!
Click to expand...


[ame=http://www.youtube.com/watch?v=1TD_pSeNelU]Willie Nelson - On the Road Again - YouTube[/ame]


passed mot!! yeeee haaaa....

30 hours of welding in 6 days... as well as workin! i'm knackered....
 
Ordered a couple of new wiper parts and completed my bulkhead welding :D as well as drivers side footwell and mud guard

Leave me with the grinding, passenger footwell and some drilling to do for the new wipers

Getting so close to finishing now
 
Sorted the tracking, according to the guy that did it, it was "off the scale"? Adjusted to the correct settings the steering centres quicker, seems lighter and hopefully my new tyres will wear evenly.
With the steering box drop arm at the correct 90 degrees angle, the wheels pointing straight ahead and the tracking set, the steering wheel is now almost a quarter turn off centre. So jobs for today 1) reposition the steering wheel and 2) adjust the lock stops to give maximum lock without catching.
 
Just got mine back from annual State Vehicle Inspection (same basic thing as MoT), and it came through with flying colors! Not bad since I just bought it at a fairly inexpensive price, and had a suspicion that the seller knew something that I didn't.
Next thing I'm going after is the heater. I seem to have quite effective AC, but no heat and will be looking first at the mixture flap servo motor and its connections. I notice that the manual shows some vehicles with a different set-up with little knobs that seem to work the flap levers through cables, with no servo motors. It looks a lot simpler and more reliable. Has anyone transplanted this option into a vehicle with the digital heater controls? Would it be worth the effort?
 
Today I have cleaned my wheels and tyres of mud and grease, tyres still brown though :(

Also, removed clumps of mud from behind my flexi arches, dirty horrible job!

Looked into mounting my CB, come up with a half sensible option if it wasnt for my slide out screen getting in the way....
 
Welded on the windsceen mounts and fitted the fuel tank back in as well as painted a couple of bits

Picked up plenty of bits and bobs for tomorrow though, chemical metal is going to save me some agro welding the inside of the bulkhead
 
Opened the bonnet and decided to do a bit on the engine as it was a nice day.

Fitted top hose, 200tdi to 300tdi rad and they said it cant be done ..huh..easy. Just turn the thermostat housing around to point to the nearside and fit hose right shape off dont know what but had to insert a piece of smaller hose into rad end as it was to big but fitted ok and looks perfect.

need to fit oil pipes to turbo next and try and make dipstick fit as its a bit tight at the moment.:)
 
landowner said:
Opened the bonnet and decided to do a bit on the engine as it was a nice day.

Fitted top hose, 200tdi to 300tdi rad and they said it cant be done ..huh..easy. Just turn the thermostat housing around to point to the nearside and fit hose right shape off dont know what but had to insert a piece of smaller hose into rad end as it was to big but fitted ok and looks perfect.

need to fit oil pipes to turbo next and try and make dipstick fit as its a bit tight at the moment.:)
Click to expand...

:nopics:
 
Took the spare wheel carrier of the back door and bolted the spare wheel onto the bulkhead behind the seats.I cut some washers to fit on the backdoor bolts(outside)out of some old welly's/wellies(take your pick)and im feling like a mechanic.lol.next job is pumping grease into everywhere i can.
 
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
538
BEASTIE 90
B
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
632
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
914
Knappster
Knappster
Mooky
Replacing thermostat
Replies
14
Views
563
Mooky
Mooky
I
Re-coding of ABS Module after repacement
Replies
10
Views
990
invisible999
I
Back
Top