What have you done to your Landie today.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Took the Beast for a 30 mile round trip to the MOT centre - only to find the bugger was off on honeymoon! Hey ho...try again next week...or so :)
 
Beneagles said:
Took the Beast for a 30 mile round trip to the MOT centre - only to find the bugger was off on honeymoon! Hey ho...try again next week...or so :)
Click to expand...

Where do you get your's done?
GM Autos in Dunkeld are good, but they are closed today (Thursday 12th May right through untilk Tuesday 17th) 'coz they didn't take the bank holidays so have taken it htis week-end instead.

Done nothing to mine again today, but my packages finally arrived so tomorrow should be a different story. :):):)
 
mirror.jpg


Nice new Wolf mirror.
 
Upset the wife so I can spend more time working on the Landy over the weekend instead of going out on stupid drives to her relations.
Finished refitting dash to 110 and hacking holes in it to fit Mud center console
(nice kit by the way)
Lots more work to be done over the weekend though:cool:
 
rappy1 said:
Upset the wife so I can spend more time working on the Landy ...
Click to expand...

Brilliant! Noted for future use .... ;)


My sound-deadening (eDead) has arrived so I'll tackle that after I've walked the dog.

Although I'm usually comfy enough in the TD5, I've just ordered some seat risers from Mud Uk which should improve things for me (I'm 6'7" tall). Another easy job, I reckon.

:)
 
Moved my towbar wiring/socket onto the rear tub after an incident with a large rock. :rolleyes: and then stripped down and put on the bikini top after all the lovely sunshine :p:D ...only for it to rain...:mad:
 

Attachments

  • IMG_5196.JPG
    IMG_5196.JPG
    197 KB · Views: 205
  • IMG_5184.jpg
    IMG_5184.jpg
    251.2 KB · Views: 222
  • IMG_5185.jpg
    IMG_5185.jpg
    247.6 KB · Views: 168
  • IMG_5186.jpg
    IMG_5186.jpg
    247.8 KB · Views: 184
finished putting my air tank in back of landy,linked up to arb compressor..converted 30 bar 9 litre fire extinguisher,added gauge,works a treat..run tube to rear of landy with quick connect fitting for blowing up tyres...also added pressure relief valve(pop off valve),non ret valve,isolator valve

043.jpg

003.jpg

002.jpg

004.jpg

005.jpg
 
nunny.bdsc said:
finished putting my air tank in back of landy,linked up to arb compressor..converted 30 bar 9 litre fire extinguisher,added gauge,works a treat..run tube to rear of landy with quick connect fitting for blowing up tyres...also added pressure relief valve(pop off valve),non ret valve,isolator valve

hope you got a compressed gas sticker on the outside of landie too ;):D
Click to expand...
 
buckshot said:
nunny.bdsc said:
finished putting my air tank in back of landy,linked up to arb compressor..converted 30 bar 9 litre fire extinguisher,added gauge,works a treat..run tube to rear of landy with quick connect fitting for blowing up tyres...also added pressure relief valve(pop off valve),non ret valve,isolator valve

hope you got a compressed gas sticker on the outside of landie too ;):D
Click to expand...

yes,thought ad better,,painted extinguisher black and stuck sticker on it that way someone wont try put a fire out with my air,..l.o.l
Click to expand...
 
bludy air lockers got a air leak on it though.undid the breather off axle,and could feel air,at least if its pressurised its less likley to let water in ,ha ha,
 
Whipped off the two MOT failed brake pipes (master cylinder to o/s front, master cylinder to rear axle and made new ones up) and completely drained the system for fresh brake fluid. Replaced the front N/S wheel bearings and took shims out of swivel pin to take up a little free play, replaced rear O/S wheel bearings. Fitted my new brake pipes and bled the system. Found the fault in my rear fog lamp (really bad wiring and corrosion in lamp unit.)

My nephew fired up his compressor so I spend a couple of hours blasting a hell of a lot of the sand/lime whatever it is that has about 75% filled all my chassis, cross members and everything box-shaped.

Took it for a 5 mile test drive and everything feels good.
 
Last edited:
bought a ifor williams back for the 110 double cab off fleabay (finally! :doh:) bid on 3 this week and lossed um all by a pound! :mad:
just gotta get it (pickup only) from newton abbott :rolleyes:
 
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
538
BEASTIE 90
B
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
636
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
915
Knappster
Knappster
Mooky
Replacing thermostat
Replies
14
Views
570
Mooky
Mooky
I
Re-coding of ABS Module after repacement
Replies
10
Views
990
invisible999
I
Back
Top