What have you done to your Landie today.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
new filters, cleaned sedimentor and attempted to fix the cruise control just for the hell of it.

Took drivers carpet out to try and find water leak, nice surprise very little rust & no holes but soaking wet soundproofing. No leaks from heater, no sunroofs so clueless as to where water coming from :confused: (clean water with no smell or stickyness)
 
Finished welding in the drivers side sill/rockslider box section, and ran out of gas again as I'd only got a small bottle. Something wrong here 'cos it should have lasted much longer i think and I can't get the time or a vehicle to get more welding gas for a few days ...

So I removed the front and rear ARB's, undid and checked and re-greased all wheel bearings, 'cept the one i've just changed. Bought some more oil for the diffs, gearboxes and engine, filters and service stuff for a full service, oil/filter change when i get more time. Removed the under bonnet mud/water soakaway (sound insulator), generally cleaned things up a bit and oiled/greased where necessary.

Greased alll UJ's, prop slides, noticed the front diff input is leaking so want to do that before Wales trip, but it shouldn't take long. Squirted some lithiumm grease onto all bushes, suspension etc etc.

Drove round the car park and can't believe how noisy it is without carpets, door seals, sound matting or seats! Might have to get some stick on insulation, but that's for later.

had a shower and now getting ready to go back to work ...;)
 
Paul D said:
Finished welding in the drivers side sill/rockslider box section, and ran out of gas again as I'd only got a small bottle. Something wrong here 'cos it should have lasted much longer i think and I can't get the time or a vehicle to get more welding gas for a few days ...
Click to expand...

what size bottle ?
 
Sean said:
what size bottle ?
Click to expand...

Dunno .. same size as a Large paint spray can .. thrown away now as it was disposable. I wouldn't have had it normally but was given it to try till I can get my real bottle re-filled.
 
Ah, right .. I was told it'd last about an hours worth of welding ... ;)

As you might tell, I'm all new to welding. Me bro is time-served welder, and gives me good advice, but lives in a different village and works for a small firm so can't help with bottles etc, more's the pity.
 
gcoo8154 said:
why you selling her bud??
Click to expand...

Just not getting time to use it really and the time situation will only get worse. I just lost the storage space for an MG Midget that I started restoring about 5 years ago so that is back in my garage and I need to get to work on it again. I'll also have a baby to contend with in a few weeks time which I'm sure will severely limit my garage/playing time!!!

A real pity after all the work that has gone into the Landy and I already know I'll miss it but unfortunately I have to sensible at the moment :( I'm sure I'll be back sometime in the long distant future :)

Cheers


Richard
 
Welded diff last nite & the fooker just kep leaking thru the welds :mad: Finally got sealed, after 4 attempts. & left it overnight to make sure it was sealed. Had a look an hr ago and the fookers still weeping Albeit a tiny amount. So packed a full tube of Plumbers Mait Leakstop. epoxyresin Tis desgined for plugging leaky CH rads & boilers. & I've sealed Eggsauces wiv it before. SO hopefully that will cure it. :D :D

This is the stuff. Evo Stik Plumber's Mait Quick Leak Repair Putty 455993 Copper Effect 50g, 455993 except mine is grey??
 
redhand said:
So packed a full tube of Plumbers Mait Leakstop. epoxyresin Tis desgined for plugging leaky CH rads & boilers. & I've sealed Eggsauces wiv it before. SO hopefully that will cure it.
Click to expand...

Don't forget to let us know if it work's, I could do with patching a small diff leak until end of summer, other's jobs have got priority before I fit a new diff pan...
 
Dewin said:
Don't forget to let us know if it work's, I could do with patching a small diff leak until end of summer, other's jobs have got priority before I fit a new diff pan...
Click to expand...

Well It's not leaking at the mo :rolleyes: just have to keep checking it if it leaKS i'll top it up as required. Gonna get another axle & HD diff pan and weld it in place. & fir noo springs & shocks then do same for this axle and keep it as a spare. for when the inevitable happens. :(

If ya gonna use the epoxy resin metal mend type ****. Ya need to degrease the area completely or it won't stick. the weep on mine was minute so cleaned & degreased the area before applying it in 3 coats each one covering a bigger area than the previous layer. Use a wet finger or small paint brush to smooth it down as you're applying it.
 
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
549
BEASTIE 90
B
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
641
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
919
Knappster
Knappster
Mooky
Replacing thermostat
Replies
14
Views
577
Mooky
Mooky
I
Re-coding of ABS Module after repacement
Replies
10
Views
995
invisible999
I
Back
Top