What have you done to your Landie today.
- Thread starter madfrank
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Reeves
New Member
- Posts
- 52
- Location
- Bedfordshire
Changed the bearing in the belt tensioner,that was once i managed to remove that bloody circlip.
TaDa
Active Member
- Posts
- 432
- Location
- Barnstaple or thereabouts
Replaced the coolant bleed screw on my TD5 disco.
The old one's head snapped off - leaving the thread in the hole!
Needed delicate use of a 1mm drill and a watchmakers screwdriver.
Great fun!
The old one's head snapped off - leaving the thread in the hole!
Needed delicate use of a 1mm drill and a watchmakers screwdriver.
Great fun!
955i
New Member
- Posts
- 102
- Location
- Langley Mill, Derbyshire
Waxed it, back to blacked it and vaccumed it.
Not a usual routine but getting rid of it so need it clean
Not a usual routine but getting rid of it so need it clean
Noticed that she has been losing coolant, no heating issue's, mayo under cap or obvious sign of crystals ... checked all hose's, only found 1 suspected leak point where jubilee clip was not tight, hopefully she'll be ok now...
Whilst underneath I found a body mount that developed a hole when I poked it:doh: & there's a new oil leak :doh:
Whilst underneath I found a body mount that developed a hole when I poked it:doh: & there's a new oil leak :doh:
ratty
I'm not special I'm limited edition
- Posts
- 34,277
I didn't do nuffink to mine. The plan wast to clean out one of my pond filters and then fit a new hose clip as I have a spring one that leaks. I ended up having to temporarily repair the pipe to the outside tap where the ballast decided to leave the pipe full of water over winter. This is the 3rd time she's done it now. I wouldn't mind but we have a tap inside to isolate the outside tap. All she has to do is leave the outside tap on and turn off the inside tap. Useless feckin bint.
- Posts
- 4,201
- Location
- North Norfolk
removed and cleaned out the intercooler (loads of black crap came out) while waiting for it to dry, removed the centre console, radio etc found the feckin' wire that was shortin out, replaced it and now have a working clock, radio and cigrette lighter aswell as a nice clean intercooler
GRATCH
HUGE MEMBER
- Posts
- 15,475
- Location
- North Cheshire
greased the props on the disco & 90
started takin bits off inside me scrapper disco......took ages because i had to unload bits from me mates scrapped disco wot were inside it:doh:
started takin bits off inside me scrapper disco......took ages because i had to unload bits from me mates scrapped disco wot were inside it:doh:
Terra Dog
New Member
- Posts
- 289
- Location
- West Midlands
I've stuck the insulation back on to the underside of the bonnet, in the rain I might add. Been meaning to do it for weeks.
robint
Well-Known Member
- Posts
- 7,057
just bought meself a 110 csw all thats wrong with it is the rear cross member needs attention
Sirus
Your all Banned except me
- Posts
- 22,196
- Location
- The Country of Black
Pikey will be busy
Beast o Bodmin
Banned
- Posts
- 17,157
...grip fill it and paint over like every other ****ker does....
buckshot
Well-Known Member
- Posts
- 9,841
- Location
- right yer!
:jaw::screaming_bug_eye_f
fook that musta hurt !! ? deep pockets :hysterically_laughi:hysterically_laughi:nopics:
just bought meself a 110 csw all thats wrong with it is the rear cross member needs attention
fook that musta hurt !! ? deep pockets :hysterically_laughi:hysterically_laughi:nopics:
robint
Well-Known Member
- Posts
- 7,057
955i
New Member
- Posts
- 102
- Location
- Langley Mill, Derbyshire
Got rid of it :5bhurray::5bhurray:
Now no longer have the worry of the Freelander and have a nice Series II Dicovery instead
Now no longer have the worry of the Freelander and have a nice Series II Dicovery instead
gemsdad
NOT BOTHERED.
- Posts
- 67,807
- Location
- halfway between here and there.
Got rid of it :5bhurray::5bhurray:
Now no longer have the worry of the Freelander and have a nice Series II Dicovery instead
well done,now go and tell all the other gaylander owners to do the same thing.
Tim.C
Active Member
- Posts
- 783
- Location
- Halesowen, West Midlands
Stood in the cold and rain watching someone else change my brake pads.
I know I should have done it myself, but it was raining
I know I should have done it myself, but it was raining
gemsdad
NOT BOTHERED.
- Posts
- 67,807
- Location
- halfway between here and there.
Stood in the cold and rain watching someone else change my brake pads.
I know I should have done it myself, but it was raining
:doh::doh::doh:
