What have you done to your Landie today.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
landowner said:
Finished painting the chassis and had a look at the engine, needs steaming off and the gearboxes painting maybe blue I think:rolleyes::)
Click to expand...

Yet more blue eh :p
I painted me rocker cover blue today. Well I wouldn't want to much would I :D

DSCF2197_zps73511621.jpg
 
It failed on brake pedal to much travel and front passenger side wheel bearing needed nipping up. Just need to get to the bottom of this ticking noise.
 
danny6801 said:
It failed on brake pedal to much travel and front passenger side wheel bearing needed nipping up. Just need to get to the bottom of this ticking noise.
Click to expand...

Not too bad, rear drums or disks? may just need adjustments :D

Mine had a lot of travel. plus pedal kept sinking so fitted new master cylinder and fixed prob
 
Re-fitted new door top seal on passenger side with tad deck sealant to make up for slight unevenness as just had a tiny leak. Drivers side now finally dry! happy days :)
 
Yesterday, Fitted my near gearbox, new transfer box seals, master and slave cylinders, greased up the props, fitted the Detroit tru-trac to the front axle with new CV joints and drive-flanges and checked the wheel and swivels bearings and fitted the Detroit locker to the rear Salisbury axle. Must wait until next week until my new intercooler arrives and can replace the cracked one then and should be back to full health then :)


Looks like I needed the lockers anyway...

This was the diff center that came out or the front axle! :eek: :D

10155122_10154147697585608_3663271501020278003_n.jpg


Also fitted a tuning box I got secondhand, new MAF and straight through center section exhaust pipe to my dads Disco 2... Pulls quite nicely now as I fitted a larger intercooler to it a while back so making the most of it now with the chip! Hopefully he might still want more power soon and buy my VNT so I can get the bigger one :D
 
Just split my bottom
Collant pipe. It got caught on the steering column, and a bolt ripped a hole in it :(
 
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
536
BEASTIE 90
B
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
631
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
910
Knappster
Knappster
Mooky
Replacing thermostat
Replies
14
Views
559
Mooky
Mooky
I
Re-coding of ABS Module after repacement
Replies
10
Views
988
invisible999
I
Back
Top