What have you done to your Landie today.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Just make sure you're keeping the fluid topped up enough otherwise it draws in more air, that was my problem. Eventually just got the person operating the clutch to keep an eye on the reservoir rather than me crawling out from underneath it all the time, took longer than I would have liked though lol
 
the_wolf said:
Just make sure you're keeping the fluid topped up enough otherwise it draws in more air, that was my problem. Eventually just got the person operating the clutch to keep an eye on the reservoir rather than me crawling out from underneath it all the time, took longer than I would have liked though lol
Click to expand...

yes.. that also happend to me, turned out the helper was looking at the wrong thing.. lol
 
Well found out why I cant bleed the clutch... my drives on a slope so the nipple was not the highest point!
Run out of time again! job for the morning before whaddon :eek:
 
Give me a shout if you need a hand to bleed it! otherwise I will see you at Whaddon, I have put in Two sleepers so you can cross the stream if you don't want to cross the waterhole
 
Kicked and shouted at it!

Went out this morning to pop to the shops and the battery was dead! I've been doing 40-50 miles a day all week so have no idea what that was all about. RAC man came and jumped it as my boater was flat as well and he did a battery check and said its fine, no dead cells etc.

Ill have to keep an eye on that now!
 
krams300 said:
Give me a shout if you need a hand to bleed it! otherwise I will see you at Whaddon, I have put in Two sleepers so you can cross the stream if you don't want to cross the waterhole
Click to expand...

Cheers mate. I got a pressure bleed kit now so fingers crossed I should be alright now, I've also turned her around to face uphill.
Saw the vids, I'm subscribbed to your youtube channel, looks good. You've put lots of work into the site!
 
Welderised me passenger door......it's still fooked but at the the removable door top int gonna remove itself...

My lad had resorted to clinging on to it on the motorway the other day despite me telling him that it'd 'probably' be ok :eek:
 
I doubled up the sleepers this afternoon, also put some slabs down so we can cross the stream further up (where people tried to cross and end up bending their steering bar). We can do a full circuit now without crossing the waterhole. Another vid will be on shortly. See you tomorrow.
 
Took the bearing out of the squealing AC on the 300tdi, I just have to find n buy a replacement one now. Fixed the knackered and horrible sagging drivers seat with nylon cord and a few giant tie wraps.

The nylon clip nut thing on one of the rear window mechanism fell apart and i couldn't find one anywhere, so after some google'ing and a bit of youtube inspiration ended up with this 10p fix / bodge.

IMAG0439_zps33e59bb3.jpg


IMAG0441_zps8241b192.jpg


IMAG0442_zps5c03f86a.jpg
 
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
530
BEASTIE 90
B
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
608
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
884
Knappster
Knappster
Mooky
Replacing thermostat
Replies
13
Views
460
dag019
dag019
I
Re-coding of ABS Module after repacement
Replies
10
Views
963
invisible999
I
Back
Top